PDA

View Full Version : 16v williams Brake PART


evouk
20-10-2007, 15:37
CLIO 16V WILLIAMS BRAKE COMPONENET AS PER PIC.

YOU HAVE THE FLEXI HOSE COMING FROM THE CALLIPER THEN HOSE FIXES TO THIS PART WHICH CONNECTS TO THE BRAKE PIPE.

need two of them as mine are threaded which is why there pissing brake fluid out.

Anyone got any or point me to a place that has them ASAP????
MatBrown
20-10-2007, 16:32
Do they live on the inner wing?

Picture is too big, can't quite make it out.


Mat.
evouk
20-10-2007, 18:23
yes yes
stevie_b
20-10-2007, 18:36
Have you got a pipe flaring tool? I've just checked my braided hoses to the caliper and they are standard sized brake unions. Just chop the one off on the car, slide another one over the pipe (available from any motor factors for about 50p) and flare the end. Then screw that union into your braided pipe and you're done.
evouk
20-10-2007, 19:17
sort of get what you mean, have no flaring tool though
2 live
20-10-2007, 20:09
im just on with making all new brake pipes for the valver. have the all the rears, and front-rear pipes, just the fronts to do now...want me to knock u a couple up??
evouk
21-10-2007, 20:13
i think im ok for pipes at moment chap but will defo let uou know if i get stuck....

STILL AFTER THIS PART ASAP{
2 live
21-10-2007, 20:29
was just thinking that you could bypass this part with slightly longer brake pipes. mine dont have this, just screw into the top of the braided hoses.
evouk
21-10-2007, 20:35
Yes ive been to various scrap yards to get the same part and lots of the cars (clios) non 16 v or williams have a totally differnt fittment.

If i cant get these original ones that are in mine i think i will be joining the hoses direct to the pipes and working out how to fit them to the carrier on the inside of the arch.
evouk
21-10-2007, 20:39
pic
evouk
21-10-2007, 20:41
http://img.photobucket.com/albums/v78/cashy/brake3.jpg
http://img.photobucket.com/albums/v78/cashy/brake2.jpg
evouk
22-10-2007, 20:56
PROBLEM SORTED NOW - THE PARTS ABOVE ARE NON RENAULT STANDARD ITEMS....THEY MAY HAVE BEEN ADDED AT RENAULT FACTORY WHEN CUP CAR WAS BUILT OR ADDED BY THE RACE TEAM THAT OWNED IT BEFORE

BRAKES NOW WORK VERY WELL SO FAR AND THERE NOT BEDDED IN YET