View Full Version : HELP..!! how do i tell a piper cam to a standard cam?
dannii16v
10-09-2007, 19:10
i took the inlet piper cam out of my engine,how do i tell f it is an piper cam or a standard cam?
MatBrown
10-09-2007, 19:15
Usually have model numbers stamped on the end.
Mat.
dannii16v
10-09-2007, 19:22
only have the inlet one out
Mr.AdamB
10-09-2007, 19:23
wats the serial number on the end of the cam?
dannii16v
10-09-2007, 19:30
there isn't one on the end of the inlet cam!
Mr.AdamB
10-09-2007, 19:37
take off the dizzt and rotor arm and then the bit bolted to the side of the head should be a number under there. ive tried to get that bit ofd tho but i coudltn maybe u have more luck lol
dannii16v
10-09-2007, 19:39
snapped the torx bit in the last bolt that was holding the exhaust cam in :(
Mr.AdamB
10-09-2007, 19:42
ahh welll..... uhmmm...... dont kno then :(
dannii16v
10-09-2007, 20:01
measured 113mm all round one of the lobes, not 100% accurate though
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.