View Full Version : Clifford Alarm
MatrixGuy
11-08-2007, 16:56
Hiya,
I have a Clifford Concept 300 alarm system thats fitted to my Williams.
Does anyone know why it wouldn't "chirp" when locked/unlocked?
I think it may be the backup battery but how easy is it to replace?
Thanks
Dancliovalver
11-08-2007, 17:34
i know u can press a combo of buttons on your fob to make the alarm silent, if you have a manual try that
hope this helps
MatrixGuy
11-08-2007, 17:47
i know u can press a combo of buttons on your fob to make the alarm silent, if you have a manual try that
hope this helps
i tried that bud, no luck. :(
If you look on the clifford site they have all the manuals on there, but you have a separate box in the car somewhere with buttons on it, and its those which you need to find and fiddle with.
Like i say its all on cliffords website.
Hope this helps mate.
MatrixGuy
11-08-2007, 19:26
If you look on the clifford site they have all the manuals on there, but you have a separate box in the car somewhere with buttons on it, and its those which you need to find and fiddle with.
Like i say its all on cliffords website.
Hope this helps mate.
I read the manual completely bud. It says you can change settings via the PlainView 2 switch but mine doesnt have one!!
yeh thats the one, i can only guess if it doesnt have it then you cant change it unless you buy one...
clio_rsi_turbo
11-08-2007, 20:19
they all have them, its just a case of finding it. mines fitted in the glove box.
save your self the hassle remove the clifford and get a real alarm :D
clio_rsi_turbo
11-08-2007, 21:55
:shock:
MatrixGuy
12-08-2007, 11:11
they all have them, its just a case of finding it. mines fitted in the glove box.
ahhh, i see, might have a look around, lol.
I thought Clifford was one of the best Allan?!
put it in valet mode then disconnect the car battery, wait about 5mins then reconnect the car battery and take it out of valet mode, should work again then.
:)
oh i hate cliffords with a passion lol.
used to work at a place that installed them and they were always going wrong and forgetting settings ect.
Toad all the way if i needed one.
MatrixGuy
12-08-2007, 16:33
well i found the Plain View 2 swtich, lol, it was pratcially right in front of my nose. :oops:
I entered thr valet code but didnt hear any chirps like it said i wud.
going to get a new back up batter. does anyone know where the siren/box is?! lol.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.