View Full Version : Williams Subframe on a Valver
Is this a straight swap and would my ARB still fit or would the Williams ARB be required.
I have 1 year old driveshafts and new Valver bushes for both the ARB and Wishbones, so don't want to go widetrack especially as I doubt my FK coilovers will fit as they have a different model for the Williams.
So in a nutshell, will all existing parts fit to the Williams subframe and is it worth it, ie stiffer and better handling?
Yup will all fit, williams subframe is stronger, but also heavier, doubt you'd notice any difference unless you regularly tracked your car
Clio_GTT
25-07-2007, 19:04
I've got one on mine and didn't notice a difference tbh, but i think this and my strut brace contributed to my fecked roof :cry:
white16valver
26-07-2007, 11:46
I think I'll leave mine with bendy suspension so I don't get a bendy roof lol
I imagine that unless you caged it, any stiffening you do (coilovers, strut braces etc) will stress the already paper-thin shell!
I've got a stitch welded williams subframe and a strut brace and my roof is fine, having said that it hasn't found its way onto a track yet
Nick Hill advised me that the roofs crease through flexing. Which is why a strut brace helps. That is why I got mine. So hopefully a stiffer subframe with my coilovers will be alright.
Nick Hill advised me that the roofs crease through flexing. Which is why a strut brace helps. That is why I got mine. So hopefully a stiffer subframe with my coilovers will be alright.
A strut brace causes the roof to crease lol
Clio_GTT
26-07-2007, 20:45
Nick Hill advised me that the roofs crease through flexing. Which is why a strut brace helps. That is why I got mine. So hopefully a stiffer subframe with my coilovers will be alright.
A strut brace causes the roof to crease lol
too right it does, my roof was fine before the willy frame and brace, now it's creased at the corner of the sunroof. It's no biggie as at the end of the day it's a 15 year old french hatch. Give it some stick and make her corner on three wheels, that'll buckle your roof
Any car that corners on three wheels is going to have to flex, i had a 95 valver with a straight roof, until i fitted a strut brace, managed to bend the one on my hybrid without a brace, gonna rip out roof lining tommorow hopefully and fix the leaky sunroof and bent roof
My Ph3 1.2 8v started to crease on the roof.
I want a strut brace on the willy - seen as I have standard suspension and no sunroof I'm assuming i'll be ok?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.