View Full Version : intercooler
lewis_willy2
15-07-2007, 12:57
as above
preferably one with inlet and outlet on the same side. needs to in good condition and fit behind williams bumper? but to a pain i want it to fit the mouth on the bumper perfectly so no, r5 gtt ones please?
lewis_willy2
15-07-2007, 19:20
good question, im not sure?
gotta be near 600x150
work out what you need then phone an intercooler place. then see if you can get on secondhand.
I have a 4wd cossie intercooler.. Deep core and good for 20+ psi. All the brackets are ground off as it was gonna go on my series 2 turbo, but ended up changing my plans.. Just sat there doin nothing, only thing is the inlet and outlet are opposite ends.
lewis_willy2
18-07-2007, 23:36
will it fit?
I just measured it
Core length is 18.5 inches
Height is 4.5 inches
Depth is 5 inches
With the curved input and output length is 26inches
Think perhaps too big
2wd cossie one fits perfectly in that space in the bumper, but the inlet+outlet are on the same side, i know because i bought one when i had ideas, the only way to get the wrong side to the right side is to run it underneath/behind the intercooler, it can be done but its a pain... you can fiddle with the rad by moving it back to get more room..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.