intercooler

[lewis_willy2]

as above

preferably one with inlet and outlet on the same side. needs to in good condition and fit behind williams bumper? but to a pain i want it to fit the mouth on the bumper perfectly so no, r5 gtt ones please?

[MAXIBOY]

what size is the mouth.

[lewis_willy2]

good question, im not sure?

gotta be near 600x150

[MAXIBOY]

work out what you need then phone an intercooler place. then see if you can get on secondhand.

[thelynx]

I have a 4wd cossie intercooler.. Deep core and good for 20+ psi. All the brackets are ground off as it was gonna go on my series 2 turbo, but ended up changing my plans.. Just sat there doin nothing, only thing is the inlet and outlet are opposite ends.

[lewis_willy2]

will it fit?

[thelynx]

I just measured it

Core length is 18.5 inches
Height is 4.5 inches
Depth is 5 inches

With the curved input and output length is 26inches

Think perhaps too big

[midge]

2wd cossie one fits perfectly in that space in the bumper, but the inlet+outlet are on the same side, i know because i bought one when i had ideas, the only way to get the wrong side to the right side is to run it underneath/behind the intercooler, it can be done but its a pain... you can fiddle with the rad by moving it back to get more room..