View Full Version : Williams head
Hi guys,
The head on my hybrid is shafted and is burning oil like no tomorrow so i'm after a replacement head.
Anything considered really but it has to be in working condition, ideally ready to go on straight away but i'm willing to get a bit of work done to it if need be.
If you've got one thats ported, polished, cammed up etc then thats even better!
Let me know what you've got.
Cheers!
lukebartlett2405
07-07-2007, 13:14
i have a valver head all working everything attached no mods that i know of done to it though
Thanks mate but need a willy head!
I should have a working williams head sson when bens finished with my engine install.
This week, will email ben and find out.
Cool cool any more offers?
Need one soon!
ive got a williams head with 6 bent valves tho, was on 70k when it came off
pm if your interested
im based in ayrshire scotland
Thanks for the reply but ideally i'm looking for a head ready to go on, don't want to have to have it reconditioned (unless it's a simple thing to fix 6 bent valves but i don't think it is?)
So, still on the look out, let me know what you got.
valves are £84 plus vat for a set of FOUR inlets from Renault....and they only come as fours.
Ive already told you Ive sourced one....
i have one sat at ANGLEWORKS if your stuck.
valves are £84 plus vat for a set of FOUR inlets from Renault....and they only come as fours.
Ive already told you Ive sourced one....
IS that teh same with the exhaust valves from renault, i got 8 new exhaust valves at £10 each inc VAT from a local motor factors when i ahd my head gone over as mine were warped
exhaust valves can be got for 6-7 at factors....thing is williams inlet are RENAULT ONLY :shock: grrrr
valves are £84 plus vat for a set of FOUR inlets from Renault....and they only come as fours.
Ive already told you Ive sourced one....
How much for just the head, posted?
I think i'm just gonna go back to standard and get the head fitted by a friend of mine as i can't really be bothered spending money on it at the moment, just need to get it running right!
If you can PM me about the head craig that would be sweet, i'll probably have it off you if it's ready to rock! 8)
Does it come with standard williams cams etc?
KEEP TRYING BEN AS MINES THERE WAITING
Dancliovalver
01-08-2007, 23:12
http://cgi.ebay.co.uk/CLIO-WILLIAMS-CYLINDER-HEAD-F7R-CLIO-16V_W0QQitemZ180145091083QQihZ008QQcategoryZ10410Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem
Cheers dan, will keep an eye on that.
Any more? :D
just use a 1.8 head mate, common as muck them and slap ur willy cams into it, be reet and shudnt loose to much through the 1 or 2 mm smaller inlets or whatever
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.