Petrol pump to fit early ph1 valver

[BristolSam16v]

Need 1 ASAP, mines an early ph1 valver so can't access the pump from the rear bench, not sure if that means its a diff pump.

[BristolSam16v]

:bump:

[MAXIBOY]

i have one will look tomorrow

[AndyFielder]

i have one also if maxi cant get one.

Andy

[BristolSam16v]

Still need one :(

Bosch part no 0 580 453 044

Its seperate to the sender unit.

[BristolSam16v]

*bump*

[northy]

any pictures mate - when u find one ?

[MAXIBOY]

i sent him one but i think it was different to his

[arj256]

I have one but not certain if its working.
Turned out at the time the problems i was having was with the live wire and not the pump.
So this has become spare but untested.

[BristolSam16v]

Maxiboy - sorry haven't got round to posting it back, bit difficult to get to post office at the mo with no car :( Was the 1 you sent me from a unit where the level sender was seperate to the fuel pump or were they together?

[MAXIBOY]

separate mate. think all phase 1,s were

[BristolSam16v]

Bugger, weird how its a different size? Im guessing if I did order a 'motorsport upgrade fuel pump' off ebay it wouldn't fit my car either then :(

[MAXIBOY]

not really had to mod my holder to get it to fit. different filter and fixings

[BristolSam16v]

hmm might see if I can bodge that pump you sent me into the holder, thing is its so small compared to the old one Im pretty sure it will just fall straight out :(

How did you bodge yours? Also how do you get the plastic surround apart, got the pump out eventually but could seperate the plastic bits, looked like there was a long piece of spring loaded metal holding it together?

[MAXIBOY]

wrapped mine in rubber layer from bike inner tube then fitted it. mine housing had little plastic clips and needed cutting to fit the new pump