harness fixings

[AndyFielder]

http://www.rallydesign.co.uk/catalog/product_info.php?cPath=66_72&products_id=305

Would those be the correct ones?

I want them to screw into the old passenger seatbelt holes.

Andy

[stevie_b]

You mean the holes under the rear bench?

[AndyFielder]

yeah.. sorry, you know what i mean!!


Im hoping they are right, i feel a large rally designs order comming up!

Andy

[northy]

you can get them from ebay aswell mate.

[stevie_b]

Yes, they are 7/16 ones. I'm not near the car at the mo to check, and maybe getting confused with one of my other cars with harnesses in, but I think you'll also need a 7/16 mounting eye to put behind a hole that you'll need to drill near the front seat into the centre tunnel - if I remember correctly the pre-tension seatbelt design on the Clios meant that the seatbelt fixing in the centre of the car was originally into the seat itself (which you will probably have removed to fit buckets?) rather than the car.

[MAXIBOY]

yes what he says

[AndyFielder]

cheers lads!

goto order 11 of them i think... 3 for spare wheel mounting. 5 backs and 2 45 degree 63mm elbows :D

(can you confirm the ammount needed for 4 point harnesses... 8 or should i use 6 and send the shoulder straps to the same one.

Andy

[stevie_b]

Should be 8 really. Shoulder ones should go to 7/16 eye in side of car body and the other one to the fixing point under the rear bench - there are two of these and you use one for each side's seat. If you don't have buckets with belt holes going through them then cross the belts behind the seat so that the opposite shoulder belt goes across to the fixing point on that side of the car. I can try to draw a diagram if that isn't that clear?

[MAXIBOY]

separate them other wise you should of bought 3 point harness.

[Swervin_Mervin]

I thought it was rear bench upper mounting, lower mounting, front belt lower rail and front belt buckle point.

[AndyFielder]

no thats fine!

thanks alot guys...now im going to kill anyone that bids against me on ebay!