Swervin_Mervin
30-05-2007, 20:03
Finally got round to fitting the new boot strip I got for the "J". Reason I'd never fitted it was that the holes that were pre-drilled in it for the badges didn't line up with the badges. :roll:
So out came the Dremel-alike. Then when I went to fit it the original screws didn't fit. The holes were for shorter screws. :roll: So I had to grind the ends off the originals (there was a 3-4mm bit at the end with no thread.
Before:
http://i68.photobucket.com/albums/i5/Swervin_Mervin/DSC07061.jpg
After:
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300161.jpg
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300167.jpg
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300168.jpg
So out came the Dremel-alike. Then when I went to fit it the original screws didn't fit. The holes were for shorter screws. :roll: So I had to grind the ends off the originals (there was a 3-4mm bit at the end with no thread.
Before:
http://i68.photobucket.com/albums/i5/Swervin_Mervin/DSC07061.jpg
After:
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300161.jpg
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300167.jpg
http://i68.photobucket.com/albums/i5/Swervin_Mervin/P5300168.jpg