PDA

View Full Version : Phase 1 Engine Loom (williams or 16v)


Bayliss
09-04-2007, 16:59
as above, cheaps as chips, must have all clips for injectors etc
Bayliss
11-04-2007, 22:12
bump
MatBrown
11-04-2007, 23:07
Sorry mate,

I can't find a good one.
Tend to all get butchered.


Mat.
Bayliss
11-04-2007, 23:09
don't suppose u have any old loom thats in one piece do ya just could do with one thats all
MatBrown
11-04-2007, 23:17
Soz mate, been nicking bits off them for ages.


Mat.
northy
12-04-2007, 07:35
i have a loom but from memory the fan terminal is missing, the red wire on the white connector is loose and it has a few joins in places.
TA
17-04-2007, 22:19
i have a pretty decent one you can have for a few quid, i repaired it and cleaned it up, before i broke my valver, think all the clips are there, they might be missing the metal spring clip bit tho, can check if needs be
Bayliss
17-04-2007, 22:49
how much mate and when can u send it?
TA
17-04-2007, 23:02
grab me on msn

tom__allen {A} hotmail.com
TA
17-04-2007, 23:38
drop me an email, ill take it to work tmz in case, can send out same day, :)