View Full Version : Tools
katbloke
14-05-2005, 12:02
Just purchased a snap on top box and roller cab s/hand for £350 result i think, now i need some ideas of stuff to fill it with williams in mind anything special i should aquire apart from the obvious metric spanners sockets and torx stuff?
Cheers.Kat.
P.s starting from scartch having left the trade in 88 and sold all my old stuff on back then.
MatBrown
14-05-2005, 14:40
7mm allen key.
Mat.
VIPERONE
14-05-2005, 14:58
torx socket set 1/2 inch driver
torque wrench >210Nm
11mm socket
11mm spanner
16mm spanner
18 mm socket..comes in handy quite a lot
13 mm
10 mm
long extensions
knuckle joints
small ratchets with direct drive if poss amazin how much these come in handy too
KingStromba
14-05-2005, 18:22
Cheese sandwich
Porn mag
Oily rag
Paket of fags
Matches
Mark_Ritchspeed
14-05-2005, 19:06
****ing big hammer. Every mechanics most important tool. :D
Tools?
Stromba
Mark R
Do i need to name more?
Or you not looking for them sort of tools?
:wink: :P
Mark_Ritchspeed
14-05-2005, 21:23
:shock:
8mm sump plug removal tool.
You can use a philips head screw driver but you'll damage the sump plug.
Hub puller
Ratchet heah ring spanners are usefull too
angle grinder
15mm socket/spanner
Nut splitter
stress ball
^^stress ball^^ lmao!!!!....highly recommended
KingStromba
15-05-2005, 23:24
Copper grease
21mm cranked spanner for the strut tops.
Tow rope or RAC membership.
Jumbo box of plasters....for all those skinned knuckles
and if your planning on taking your gearbox to 1000001 peices... get a fooking good bearing puller and slider hammer ;)
katbloke
17-05-2005, 18:16
some good replies there thanx lads, also with the added suggestions which i should have expected :)
Just need a trolley dash round a snap on van or a lottery win.
lagerlout1
17-05-2005, 20:51
A big **** off hammer and a condom
If you can't fix it with the hammer, **** it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.