View Full Version : Wheel Bearings Source
When can I can I get wheel bearings for my williams in particular rear ones
regards
James
gsf http://www.gsfcarparts.com/
MattyH16valver
01-03-2007, 22:52
As above....I got one from there....very good price too. You will have to get the old one pressed out at a garage though as u need over a ton on pressure! :shock: Matt
1995clio16v
01-03-2007, 22:58
Just buy a new rear disc mate, it's far easier and less stressfull, less time consuming etc.
That's what I always do.
Just buy a new rear disc mate, it's far easier and less stressfull, less time consuming etc.
That's what I always do.
Getting new discs hence why I'm replacing the bearings as from what I have read best not use old bearings. Does anybody have a gsf part number for bearings and discs or ones pre pressed in couldn't find anything on there.
R41304 WHEEL BEARING-REAR CLIO 16v/ABS DISC BRAKES 13.44
are the GSF ones any good from peoples experiences?
MattyH16valver
02-03-2007, 00:04
seemed ok to me m8.
Swervin_Mervin
02-03-2007, 00:15
Is it not easier to just get the pre-pressed ones from \renault?
MattyH16valver
02-03-2007, 00:39
Renault Rear disks with pressed bearings are'nt that badly priced.
drsmith1979
02-03-2007, 17:10
£56+VAT i think for rear discs with pre pressed bearings
it works out cheaper to get them from renault with bearings pressed in already :wink:
yup, get them from Renault
are the GSF ones any good from peoples experiences?
I just got some rear discs and bearings from gsf and they seem good.
Worked out cheaper to buy the bearings and discs from gsf and get them pressed in.
Think it worked out around £100 where as its something like £150 from renault (both discount prices).
Swervin_Mervin
02-03-2007, 21:59
its something like £150 from renault (both discount prices).
Get out of town! I need to ask tomorrow as the bearings are shot on PCC
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.