View Full Version : Lowering Height
steve740
28-02-2007, 14:32
Can anyone tell me if there is much difference looks wise between 35mm and 50mm lowering on the front of a valver please?!
Bit random I know but really need to find out
Thanx
Steve
steve740
28-02-2007, 17:06
also what do people think of chopping a coil off springs?? last resort obviously but peoples opinions are appreciated!
Steve
ive had to do it as one of my springs snapped in half and i couldnt get another spring til the next day, and i was stuck at work, so i cut down the other one, but i would never do it again!
clio_rsi_turbo
28-02-2007, 17:33
would look roughly 15mm difference between the two :twisted:
steve740
28-02-2007, 18:24
would look roughly 15mm difference between the two :twisted:
surprised it hasnt been said sooner!!!
clio_rsi_turbo
28-02-2007, 18:32
sorry had to say it. :lol:
Lee Keefy
28-02-2007, 20:47
nyks car is around 50mm no its settled....the track car pic is roughly 35ish but on 55 tyres where as nyk's is on 50's 8)
Lee Keefy
28-02-2007, 20:48
^^^^^meant to say now its settled :roll:
damn computers!!!! :?
steve740
28-02-2007, 22:17
lol @ lee
I want mine slammed like a mother!!
this is mine about 45/50mm ish on the front, tad lower at the back lol not sure exact height drop!
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver015.jpg
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver007.jpg
this is mine about 45/50mm ish on the front, tad lower at the back lol not sure exact height drop!
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver015.jpg
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver007.jpg
That is very low mate. Especially considering it has sweet FA in the back :P
i know lol! i love it :wink:
Lowered mine 35mm on the front - but you could go lower???
http://i142.photobucket.com/albums/r120/stevewilde_2006/2007-01-30012-1.jpg
steve740
01-03-2007, 09:59
Lowered mine 35mm on the front - but you could go lower???
http://i142.photobucket.com/albums/r120/stevewilde_2006/2007-01-30012-1.jpg
are you sure thats 35mm mate?? looks lower
35mm avo springs and spax dmpers. It is low but the back is slightly lower than the front - so 50mm would even it out. Would be very low then tho. 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.