View Full Version : oil feed hose for turbo
What inside diameter is suitable for a turbo oil feed hose for a Clio?
er, what's funny about that? :?
nowt, just a polite smile??!!??
will look tomorrow if you want
will look tomorrow if you want
Yeah have a look, you'll find its between 4 and 6 mm.
:roll:
not disagreeing just as i had one supplied thought i would check the dimensions. length diameter fittings etc
nowt, just a polite smile??!!??
Ah right, cool cheers Nyk! I suspected the garage were talking crap saying it needs 1/2" - but more on that at a later date. 8)
Say, makes a change for a laydee to know about cars :) What do you do?
half inch in waaaaaay too much, considerin the oil feed into most turbo's is 2mm.
will look tomorrow if you want
Yeah have a look, you'll find its between 4 and 6 mm.
:roll:
soz my bad.
I dont know whats wrong with me tonight keep postin things that dont make sense!! :oops:
Maxiboy- apologies above.
The feed into most turbo's is 2mm - hence most oil feed pipes are between 4 and 6mm to give increased pressure as it is forced into the 2mm diametre feed into the turbo.
KJ16v, I'm no expert, just misspent my youth around a lot of turbo's.
:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.