View Full Version : seriouse tire wear!! help
Mr.AdamB
03-02-2007, 18:25
got sum seriosue tire wear there under 1000 miles old ok i went to santapod and fif 23 runs yes that f**ked them but they always wear liek this.
i have K tec camber adjustment bolts in but they still wear like this???
anyideas how to stop it???
:cry:
http://img50.imageshack.us/img50/3941/dscf4193ed6.jpg
stevie_b
03-02-2007, 18:33
Is the right hand side of that picture the inside of the wheel? If so then you are running too much neg. Great for the track, but it will wear the inner edge of the tyres out quick. Have you used the Ktec camber bolts to add neg? If so then dial some out and you'll get more life from the tyres.
Mr.AdamB
03-02-2007, 18:48
before i put them on i got the same prioblem
make it to try and straighted the tires yup to save there life but stil l wearing like this. crappy bolts!!!
gna get teracking looked at soon as well.
Lee Keefy
03-02-2007, 19:03
i'd say the way the tyre is peeling up towards the middle the tracking should sort it... :)
As lee says it may be the toe thats the issue as well as the camber as they are feathering as well by the looks of it, defo needs a full track and camber set-up.
what pressures you running? also when was the last time u didi the ball joints?
Mr.AdamB
03-02-2007, 19:33
30 psi
and dno about the ball joints ive never replaced them persnally. going to get it lal looked at soon get the tacking sorted.
Mr.AdamB
03-02-2007, 19:35
heres the other tire
http://img242.imageshack.us/img242/3681/dscf4194nq9.jpg
if the tracking's fine when its checked, do the ball joints mate
check ball joints first then tracking then camber
Mr.AdamB
03-02-2007, 19:45
ill get everything look at get it set up properly n dat. just want it sorted :)
That looks like either tracking or the toe.
Does it pull to one side? If it doesnt, then its more than likely toeing out i think!
Mr.AdamB
03-02-2007, 20:53
sum timers iot pulls to the right but sumtimes its fine.
Either uneven toe or uneven camber could make it pull. Weve had a problem at work with the A3's doing the inner edge of the tyre, as in nearly new on the outer and metal cords showing on the inner/splits etc and when we get them on the laser machine they all check out within spec. The common denominator in the faulty cars.... dunlop sp sport 9090's any other tyre and theye fine. Audi say its the tyres and dunlop say its incorrect pressures so that goes to show how in depth it can go!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.