View Full Version : Heat release on a valver...remove the grille..?
1995clio16v
17-01-2007, 19:48
Ive noticed on summer pictures that some people remove their grilles (the one in front of the radiator). Or do some do it all year round?
Does this keep the engine bay cooler?
What things can I do to keep the bay cooler?
And dont say take your IK off, please!
Cheers
Leigh
http://images.auctionworks.com/hi/72/71618/trough_jan_07_14.jpg
http://images.auctionworks.com/hi/72/71618/trough_jan_07_6.jpg
http://images.auctionworks.com/hi/72/71618/trough_jan_07_7.jpg
heat wrap the manifold and downpipe
1995clio16v
17-01-2007, 19:50
what with?....pardon my ignorance! :o
Laine_16v
17-01-2007, 20:05
http://cgi.ebay.co.uk/Heat-Wrap-for-Exhaust-Manifold-Header-1-x-15_W0QQitemZ290070740057QQihZ019QQcategoryZ38786QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
1995clio16v
17-01-2007, 20:09
Lainey,
Have you got some of this on?
Anyone got any on?
Honest opinions on how good it s please..?
Cheers
cliolord
17-01-2007, 20:13
The engine bay is suppose to be hot dude :lol: If it stays cold along with the engine with the clever low temp thermostats and fan thermo switch's, bearings etc may not expland fully which causes damage. I run a totally standard setup as oppose to thermostat, thermo switch, air filter, exhaust, grill in (temp wise). as long as the water temp doesnt go above boiling point + 5*c~ (pressurised water system) then you should have no problems 8)
yeah run a couple of cars with heat wrapped manifolds. seams to make a difference
1995clio16v
17-01-2007, 20:38
The only reason im asking for tips is due to the old chestnut..Induction kit...the engine gets real hot with this on, sucking all that hot air towards it, especially sat in traffic, but yes i know it would stay cooler if I ran the standard airbox with a filter in it..but I can't do without that supersonic roar above 4k :o
Im gonna have to think about taking it off.
A full stainless exhaust is due next week, and im sure i'll wanna keep that IK on when the exhaust is fitted and the noise is amplified ten times..
Erghhhhhh..what do I do! :?
ive always ran std set up except the fan switch, which is a low temp one, mainly cus the fan didnt work once and had a wee accident lol
but new rad/total flush of system and good coolant it runs fine
has anyone heat wrapped a valver mani and downpipe as its kinda a funny shape compared with the williams!
try ducting cold air into the bay then it will stay cooler. maybe fit some ducts. fed cold air directly on to the filter kit.
cliolord
17-01-2007, 21:07
The only reason im asking for tips is due to the old chestnut..Induction kit...the engine gets real hot with this on, sucking all that hot air towards it, especially sat in traffic, but yes i know it would stay cooler if I ran the standard airbox with a filter in it..but I can't do without that supersonic roar above 4k :o
Im gonna have to think about taking it off.
A full stainless exhaust is due next week, and im sure i'll wanna keep that IK on when the exhaust is fitted and the noise is amplified ten times..
Erghhhhhh..what do I do! :?
I run standard airbox and standard air filter atm. When I flat it, it roars like a lion on orgasm :lol: It would be louder with an open air filter but there is no need. I struggle to talk to the person in the passenger seat its so loud. Head ache :shock:
david932
17-01-2007, 22:57
whats the average life of that heat wrap??
i noticed the ss manifold glows red hot after some abuse :shock:
mines been on over a year
david932
20-01-2007, 14:05
what manifold do u run maxiboy? do u think 1 roll is enough to do a complete supersrint?
i run a turbo manifold. but i reckon you need at least one 50 foot roll maybe 2 and stainless cable ties. think screwfix is the cheapest for cable ties and ebay for the wrap
I have recently wrapped my Supersprint
http://homepage.ntlworld.com/peterj.jones/My%20Williams%20Pics/Wrapped%20Supersprint.jpg
I used 1" x 50' for the top half and ended up buying some 2" x 50' for the downpipe, and to go over the joining point.
Could probably get away with 2" x 25' For the downpipe though.
The only reason im asking for tips is due to the old chestnut..Induction kit...the engine gets real hot with this on, sucking all that hot air towards it, especially sat in traffic, but yes i know it would stay cooler if I ran the standard airbox with a filter in it..but I can't do without that supersonic roar above 4k :o
Im gonna have to think about taking it off.
A full stainless exhaust is due next week, and im sure i'll wanna keep that IK on when the exhaust is fitted and the noise is amplified ten times..
Erghhhhhh..what do I do! :?
I run standard airbox and standard air filter atm. When I flat it, it roars like a lion on orgasm :lol: It would be louder with an open air filter but there is no need. I struggle to talk to the person in the passenger seat its so loud. Head ache :shock:
girl lol
i run a green i/k and scorpion system/decat, love the sound it makes, oh i have no interior or radio so its all you hear! love it lol esp at 7k rpm!
looks good arj!
If you heatwrap a valver manifold does it crack?
yep it can do cos its cast
i had a valver manifold done and it was fine. pain to do but ran it for 8 months no problem.. think turbo manifolds can get to hot but mine seams ok so far
Ditch the clio induction kit and get a R19 16v item (you'll need the R19 throttle body too) - its a far better system (like most things on the 19) and doesn't suffer the same heat soak.
david932
20-01-2007, 22:50
cheers chaps,
arj256, how well does it perform? notice any gains?
are the steel tirs for the ends? if so how many do you need for a supersprint?
david932
21-01-2007, 13:24
*edit*
ties
clowo16v
21-01-2007, 13:36
You could get more airflow through the bonnet by making some ally spacers up to lift the back of the bonnet by a half inch or so, then removing the grille. Would create a better flow of air through the engine bay.
Matt
1995clio16v
22-01-2007, 13:11
clowo16v,
Is that just an idea, or has this been done?
^I've seen it done on turbo fords and a let nova...
yeah ive seen it on polo g40, let novas, rx7...
clowo16v
22-01-2007, 13:29
I did it on my 106 and my mate did it on a mk3 cortina with a 6.6 litre v8 in and it worked a treat.
Matt
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.