View Full Version : Fog Airscoop.
Mr.AdamB
13-01-2007, 17:45
for it all sorted thanks to bassdirect for telling were to get a scoop.
http://img206.imageshack.us/img206/5241/13012007yr3.jpg
now sucks harder than a russian wh*re
only place a feed from there should be pointing is the brakes :wink:
I found it made a difference, neatly done mate :wink:
why only the brakes. cold dense air at this point
Mr.AdamB
13-01-2007, 17:55
also there is a duck that shoots ait to the brakes next to the fog light . numpty!
Mr.AdamB
13-01-2007, 17:56
*duct* why cant i edit my posts.... wats going on!!! grrrr
Tommyturbo
13-01-2007, 18:07
so were do you get the parts to make that ?
think thats what i need to get more air to the standard air box!
coool I need some of those....they are the ones from tweeks presumably? How much work to fit...they need trimming?
Mr.AdamB
13-01-2007, 18:30
yes they are from demontweeks
+ i got sum 75mm airducting that goe sdirectly onto the airbox, i cut out the metal from the hole its got to go thru cuz it WONT go thru it so ust cut it away its holding up the aux pump but plents strength still, i take a pic of it,.
then directly onto the back on the scoop cable tie it on and seat it with sum tape,
nearly sucks my hand in wen i rev it its nuts.
Mr.AdamB
13-01-2007, 18:32
and yeah there is sum trimmage needed to fit the scoop in there but just on the outsides of thew scoop i just used a grinder to cut everything always do lol.
then i drilled a hole and just scrwwed it into ogorional fog light holes.
aint comming out now.
also there is a duck that shoots ait to the brakes next to the fog light . numpty!
That is a tiny hole good for **** all, ready the cup and clio grp A specs...........they place ducts in the fog light holes to cool the brakes, persoanlly i';d rather do with what they think than you.......oh and **** off with teh name calling we're not in school here :roll:
Mr.AdamB
14-01-2007, 14:12
ooOOOOOOOOoooooo sum 1 got a rat stuck up there arse! dint give it to me. :evil:
now sucks harder than a russian wh*re
slobberedonmydickyoubitch?
how is she doing these days :D
Post the link for the tweeks part dude...
I have one of these also. mounted it on the otherside of the bumper tho, with a grill/mesh infront to stop big particles (birds, straw, leaves etc) being sucked up into the airbox.
brake ducts that size are WAY overkill on most small cars, only needed for full on race cars which (if im correct in assuming - yours isnt lunner!). nowt wrong with using the small bits next to the foglight holes for brake ducts if so required.
imo its an excellent place for a cold air feed, and im sure it makes a difference 50mph + :wink:
running a maxi kit. i have the twin ducts in both sides. two for cold air feed.one each side too the brakes
Post the link for the tweeks part dude...
heres the link fella, http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=GLOID145 its the 6"x3" one that u need. needs to be cut down abit to fit tho but nothing major.
Where did people get there ducting from? Tweeks and halfords are well overpriced!
got mine from ebay, this is the one i got, perfect fit over airbox, http://cgi.ebay.co.uk/COLD-AIR-FEED-INDUCTION-DUCTING-3-76MM-ID-1-METRE_W0QQitemZ290071886578QQihZ019QQcategoryZ7220 5QQcmdZViewItem
^^^Same as me, Good stuff + good company imo!
david932
19-01-2007, 02:24
I have one of these also. mounted it on the otherside of the bumper tho, with a grill/mesh infront to stop big particles (birds, straw, leaves etc) being sucked up into the airbox.
brake ducts that size are WAY overkill on most small cars, only needed for full on race cars which (if im correct in assuming - yours isnt lunner!). nowt wrong with using the small bits next to the foglight holes for brake ducts if so required.
imo its an excellent place for a cold air feed, and im sure it makes a difference 50mph + :wink:
why on the other side
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.