View Full Version : power steering rack
lukebartlett2405
20-12-2006, 22:23
for valver untested came with a subframe i bought, needs a new gater £10 plus postage
david932
21-12-2006, 19:34
is that the same as a williams?
lukebartlett2405
21-12-2006, 20:03
afraid i dont know :(
BristolSam16v
22-12-2006, 13:11
No valver racks aren't the same as williams as williams have wider front track.
Clio_GTT
22-12-2006, 16:34
No valver racks aren't the same as williams as williams have wider front track.
its only the track rods that are slightly shorter, it'll fit the williams, i've got willy track with a 16v rack
BristolSam16v
22-12-2006, 17:32
^^ Isn't the rack wider you just have to wind the track rod ends in more to make a williams rack fit a valver?
no iirc correctly there the same part number.
Put it this way i has a 1.2 rack (manual) with my wide track :wink:
Flan is at easy Job changing from a Manual to Power Rack?
on a 1.2 ph3?
no iirc correctly there the same part number.
Put it this way i has a 1.2 rack (manual) with my wide track :wink:
I does too
Yeah its piss easy, depending how your pullies and tensioner etc are set up you might need extra brackets etc for the aux belt, or you might just be able to take the pump off and use a manual belt for a 1.2
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.