View Full Version : Genuine Washer Jet Pumps & Horn!!
Does anyone know both the part numbers please?
Ive got a horn set aside for you man!!! :wink:
Rock!
I may be popping round sunday for a quick splash and dash :wink:
VIPERONE
28-10-2006, 00:43
wats up with washers
Always had a problem, they don't hold the water if you will, you fill the res up and it just pisses out of all the jets without any pressure, parking on a hill is sometimes fun..
Bless the silly little things - they're not the best so a revamps on the cards :D
VIPERONE
28-10-2006, 00:51
there will be splits in thehosing.. i'll add that to the list to check
lol
not too much then!
Mounts, coolant leak, pissed washer jets, dodgy earth on fogs..
Got away quite lightly!
VIPERONE
28-10-2006, 01:06
my fogs are kaputt also...shouldnt be too difficult to repair.. :-)
Its the arse factor of removing the bumper to possibly fix them - work with everything else at the moment (never get engaged people the build up to a wedding 12 months away is still a ****er!) doesnt help things..
To be fair to the old girl she's been tremendous really - I expected to have to spend quite a lot in the beginning due to how much I paid but the formentioned is pretty much it...
Think the slight issue with reverse and the odd stiff gear is more to do with mounts than box issues
And I STILL! need to get that gibbo special plugged in the ecu
MatBrown
28-10-2006, 14:21
Always had a problem, they don't hold the water if you will, you fill the res up and it just pisses out of all the jets without any pressure, parking on a hill is sometimes fun..
Bless the silly little things - they're not the best so a revamps on the cards :D
Are the rubber seals there which the pumps sit in?
Mat.
aye, I swapped the whole system over for a newer one bar pumps a while back - everything works it just doesn't stop all that well!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.