View Full Version : Heater matrix
ok how hard is it to change the heater matrix on a valver? all i have heard is take the dash out or cut... the bulkhead lol
Laine_16v
15-10-2006, 23:07
ok how hard is it to change the heater matrix on a valver? all i have heard is take the dash out or cut... the bulkhead lol
Aye pig of a job, set a side a good long time for it so you can put everything back perfectly. Never heard of the cutting bulkhead method only the dash out job.
wait for the weekend for that one then!! lol
Dave
Had mine done on my prevous clio took the garage like 2 days as the whole dash had to come out, so as you can guess was alot of money!!
doesnt the matrix only need to be changed if it no longer blows hot air?
dan-hipgrave
17-10-2006, 17:39
Gotta do mine, been putting it off since last winter :lol:
Ive never heard of cutting the bulkhead to do it :shock:
clio_rsi_turbo
17-10-2006, 19:01
ive done two now, first one took me 6 hours, second only 4. is an arse of a job, i got away with only half removing the dash i.e. pulling it out just enough to do the matrix.
Get it done before winter.
I did a whole winter with no warm air in the car.. and it was awful. Makes driving HELL.
Now, it's not the best job.. but, gotta be one of the most important for personal sanity :p
was going to have a pop this sunday but then realised it's weston beach race.. might have to wait a little while longer, just have to keep a coat in the car lol
Dave
yep its a wanker, takin off most off the dash and undo the lefthandside, fan under the wipers mech, pipes off... ect the thought of it makes me feal tired..lol
took me 3hours and a big crow bar :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.