View Full Version : Williams 2 New owner, new on here. Tech question?
Lathafummi
10-10-2006, 21:49
First of all hello
Just picked my 2 up and its got a few little faults.
1. Tacho goes normal to about 2k then move slowly to 3k when the limiter cuts in. The car is pulling and rev it just apears to be the tacho. Any thoughts?
2. How much play should there be in the steering seam very loose, again thoughts?
Cheers for any help
Denis
sorry i am unable to help but i wish you luck in finding the prob and want to say welcome to the club,
lol, sounds well posh that must still be in work mode.
2. How much play should there be in the steering seam very loose, again thoughts?
Should not be more than plus/minus about 1 to 2 cm.
It's a common problem. The steering joint close to the pedals have gone loose. Most people here simply weld up that joint.
Hello and welcome.
1. you need to change the rev counter - see the guide here http://www.williamsclio.co.uk/forum/viewtopic.php?t=15172
2. You need to either buy a new steering column from renault (around £140) or get yours welded.
As above but heres the welding column pics - guide
http://www.williamsclio.co.uk/forum/viewtopic.php?t=9117
BristolSam16v
11-10-2006, 22:20
reference the steering play, most people buy a 2nd hand one in gd cond or weld up the existing one, isn't hard to do. To change it takes 1-2 hrs max!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.