View Full Version : **16v x5, Williams x3, 172 x2 and 182 Breaking for spares**
MatBrown
27-09-2006, 02:11
Parts always available.
Probably the greatest selection in Britain, ney, the World! :P
Mat.
Do you have the driver-side signal indicator, Matbrown?
http://www.williamsclio.co.uk/forum/viewtopic.php?t=14929&highlight=
matt you warned me abotu not checking this problem out a while back and yep... it broke...
desperately after this http://www.williamsclio.co.uk/forum/viewtopic.php?t=14934 if you have one,
cheers, TriO`
would you happen to have any centre caps off willy wheels?
cheers
MatBrown
27-09-2006, 10:37
No spares i'm afraid.
Mat.
MatBrown
27-09-2006, 12:38
Only 16v boxes left at the mo, you just missed one from Infinicar.
http://cgi.ebay.co.uk/RENAULT-CLIO-WILLIAMS-ALMOST-NEW-GENUINE-JC5-GEARBOX_W0QQitemZ220026798641QQihZ012QQcategoryZ10 410QQrdZ1QQcmdZViewItem
Mat.
Rudders16v
27-09-2006, 13:35
Have you got a front bumper and both wings in 449 blue?
If so, condition and price for the lot please mate
Illusion
27-09-2006, 13:38
Have you got an Alternator, Starter motor and manifold heat shield?
MatBrown
28-09-2006, 01:01
Have you got a front bumper and both wings in 449 blue?
If so, condition and price for the lot please mate
Got the bumper and wings but i will have to check on condition.
Mat.
MatBrown
28-09-2006, 01:02
Have you got an Alternator, Starter motor and manifold heat shield?
Not really got a decent manifold heatshield left, just sold one.
Do have an alternator tho and a starter for a 16v, no willy starters left at mo.
Mat.
Rudders16v
28-09-2006, 08:21
Have you got a front bumper and both wings in 449 blue?
If so, condition and price for the lot please mate
Got the bumper and wings but i will have to check on condition.
Mat.
Ok, if you could let me know when you've checked them. Thanks for the steering column by the way, turned up yesterday afternoon so that was great
Amirclio
28-09-2006, 10:38
Hi dude! Bit of a strange request but i need.......
- Passenger and drivers wing mirrors
- Outside temp wiring that goes from dash clock to driver mirror
- Electric mirror adjustment wiring (Adjuster inside drivers side door next to window switches, wiring from adjuster to drivers mirror and wiring from adjuster to passenger side mirror.
Basically all i need to make the mirrors electrically adjustable!
Cheers
Amir :D
Amirclio
29-09-2006, 19:41
C'mon dude!
I'm after these bits but they really do have to be MINT! Carbon bootstrip, mint glovebox, ph 2 door speaker grills, rear view mirror, ph2 wing mirror covers.
Theres more but I can't remember right now - about time I got this car in order!
Amirclio
30-09-2006, 16:33
I need standard light (got to be mint though) and indicators, need the rubbers that fit between indicator and arch also.
Cheers
Amir
MatBrown
30-09-2006, 19:53
Hi dude! Bit of a strange request but i need.......
- Passenger and drivers wing mirrors
- Outside temp wiring that goes from dash clock to driver mirror
- Electric mirror adjustment wiring (Adjuster inside drivers side door next to window switches, wiring from adjuster to drivers mirror and wiring from adjuster to passenger side mirror.
Basically all i need to make the mirrors electrically adjustable!
I also need standard light (got to be mint though) and indicators, need the rubbers that fit between indicator and arch also.
Cheers
Amir :D
I have a pair of wing mirrors and a pair of door looms which should be all you need.
Only got one set of headlights, not sure how mint they are, the rubber should be attached to the indicator.
Mat.
Amirclio
30-09-2006, 22:31
Right dude im in leicester, so your only up the road, how you fixed for tomorow? How much wedge should i bring with me?
Amir
Power steering rack
Columb
PAS Pump
PAS hoses (both)
PAS resiviour
Pr seat belt buckles
Decent front door speakers
Gearstick gator
Boot carpet
Any help would be much apreciated
Kind regards, Jonny
MatBrown
01-10-2006, 11:06
Power steering rack
Columb
PAS Pump
PAS hoses (both)
PAS resiviour
Pr seat belt buckles
Decent front door speakers
Gearstick gator
Boot carpet
Any help would be much apreciated
Kind regards, Jonny
I have a Rack,
Just sold an unwelded column so only have a welded one left,
Got the hoses and reservoir,
Got some seat buckles,
Got some door speakers,
Gearstick gator will have some small holes in from wear, they all do,
And got a willy2/3 boot carpet.
Mat.
clio_rsi_turbo
01-10-2006, 13:39
williams bottom end?
HYBRID_HAZ
01-10-2006, 14:08
Do you have a monaco blue valver driver side front wing?
MatBrown
01-10-2006, 15:37
No williams engines left and never broke a 432, all 449.
Mat.
olliemk1
01-10-2006, 20:44
Williams front bumper?
MatBrown
01-10-2006, 21:33
Williams front bumper?
Provisionally sold at present.
Mat.
Mat,
Have you got any grey boot carpet in good nick?
Craig
MatBrown
02-10-2006, 21:33
I have a williams one that is in good nick, the 16v ones normally look a bit rough.
Mat.
david porter
03-10-2006, 14:29
Im after the leccy window switch from the drivers door that operates the passenger window.
Also the passenger door pocket
Steering wheel centre pad
Top section of steering cowling cover.
Would all have to be mint though as i have all the above already, but they are all tatty.
Let me know if you can help.
Cheers
Dave
hey mate do u have a radiator for a clio williams in gd condition with no leaks? Looking for a newish one if i can get one
always one on ebay if you look mate !
MatBrown
05-10-2006, 17:20
Have one in good condition but not sure how old it is.
Mat.
16v or Willy Interior!? Prices!?
MatBrown
05-10-2006, 21:24
Got both.
Mat.
Is the aerial the stubby later phase 2 type? Approx 12" long?
If so how much for aerial and roof mount complete? Need to lose my whip type one.
Rudders16v
06-10-2006, 08:14
Have you got a front bumper and both wings in 449 blue?
If so, condition and price for the lot please mate
Got the bumper and wings but i will have to check on condition.
Mat.
Have you had a chance to check these yet?
Rudders16v
06-10-2006, 08:56
Have you got a front bumper and both wings in 449 blue?
If so, condition and price for the lot please mate
Got the bumper and wings but i will have to check on condition.
Mat.
Have you had a chance to check these yet?
Sorry Mat, ignore me, just seen your reply on CS :oops:
katbloke
06-10-2006, 12:15
Other than the tailgate matt you know what im gonna ask, there must be a way of posting them to me safely, and thats the body seals from top of door opening to the winscreen pillar the velevty ones and their fixing clips and aloso both sides of door glass rubbers the ones that fit around door glass opening.
MatBrown
06-10-2006, 17:01
Is the aerial the stubby later phase 2 type? Approx 12" long?
If so how much for aerial and roof mount complete? Need to lose my whip type one.
Yes mate.
PM'd.
Mat.
MatBrown
06-10-2006, 17:02
Other than the tailgate matt you know what im gonna ask, there must be a way of posting them to me safely, and thats the body seals from top of door opening to the winscreen pillar the velevty ones and their fixing clips and aloso both sides of door glass rubbers the ones that fit around door glass opening.
You've got no chance of those surviving Royal mail! :(
Mat.
katbloke
06-10-2006, 17:35
fancy moving your breakers yard to Devon? :D
MatBrown
06-10-2006, 17:43
fancy moving your breakers yard to Devon? :D
Heh,
Your the one in the middle of nowhere, i'm just in the middle!
Mat.
What happened to my list! :cry:
MatBrown
06-10-2006, 23:05
What happened to my list! :cry:
Didn't like your face! :P
Mat.
How long have you been blind? 8)
olliemk1
07-10-2006, 13:19
Is the bumper sold now? Please PM if still available :)
matt.
do you have any fogs in good condition, preferably with the whole thing required to fit into the bumper.
cheers
MatBrown
10-10-2006, 01:20
I do have a set but they are reserved for Daz if he ever comes and gets them fitted.
Mat.
jwarren2k2
10-10-2006, 14:35
hiya mat,
do you have a valver subframe? how much for it including delivery to portsmouth area?
thanks,
James
MatBrown
11-10-2006, 01:07
Sorry mate,
Either damaged or rusty.
Mat.
valver_pete
11-10-2006, 22:01
Do you have any spark plug covers kicking around (preferably with screws)?
Is the aerial the stubby later phase 2 type? Approx 12" long?
If so how much for aerial and roof mount complete? Need to lose my whip type one.
Yes mate.
PM'd.
Mat.
Im after the same too Matt, got another?
MatBrown
12-10-2006, 12:17
Do you have any spark plug covers kicking around (preferably with screws)?
Yes mate.
PM'd.
Mat.
olliemk1
18-10-2006, 13:48
Williams passenger door? What sort of condition?
MatBrown
18-10-2006, 17:18
Williams passenger door? What sort of condition?
Hmm, would struggle to find a mint one but i have some that are straight.
Mat.
fancy moving your breakers yard to Devon? :D
I agree with katbloke ;)
Might have to make a trip up to you at some point Mat, still need that bumper and now a tailgate. could pick some stuff up for you if you want katbloke?
Buchan16V
18-10-2006, 18:55
you got throttle boddies off a williams?? if so got a price and do u do P&P
MatBrown
18-10-2006, 18:57
Sorry mate, No TB's.
Mat.
Buchan16V
18-10-2006, 19:04
ok sound cheers
valver gearbox inculding p&p or courier to edinburgh?
MatBrown
19-10-2006, 15:57
valver gearbox inculding p&p or courier to edinburgh?
I'm out at the mo mate.
Mat.
ak well, i'll keep lookin for one thats no too far from here
oh, do you have the bits for a willy wide track mat?
hello mate,
Been directed your way to see if you have a boot for a willy 2 as the rust is pretty bad on mine. Also after a drivers door for the same reason.
thanks in advance for any help!
Paul
hands off the bootlid! :D
lol
This widetrack is a la ebay at the minute, it may be of use to you mate!
http://cgi.ebay.co.uk/RENAULT-CLIO-WILLIAMS-16V-WIDETRACK-SUBFRAME-WISHBONES_W0QQitemZ220038229690QQihZ012QQcategoryZ 10410QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Paul
:o
Didnt think the whole subframe needed to be changed, thought it was just wishbones/arb/shafts etc.. :shock:
obie_shaun996
24-10-2006, 20:20
Oil temp n leve sender on front of block next to oil filter how much?
MatBrown
25-10-2006, 00:56
hello mate,
Been directed your way to see if you have a boot for a willy 2 as the rust is pretty bad on mine. Also after a drivers door for the same reason.
thanks in advance for any help!
Paul
Hiya,
Got one good tailgate with only a very small nipple dent on it, might struggle to find a good drivers door unless your not bothered on colour?
Mat.
MatBrown
25-10-2006, 01:03
Oil temp n leve sender on front of block next to oil filter how much?
Not sure if the ones i have are fully working.
Mat.
Nickysteveo
30-10-2006, 12:48
Hi
Have you got a starter motor for a williams version one ?
Cheers
Nick
MatBrown
30-10-2006, 19:42
Not at present i'm afraid.
Only 16v ones.
Mat.
john_petchey
03-11-2006, 13:28
on ya williams ph1, is the back right quater panel in gd condition i.e no rust or dents as i need 1!!!
http://i92.photobucket.com/albums/l24/petch_02/4329_mod06me31.jpg
MatBrown
03-11-2006, 16:19
Yeah, it's pretty solid.
Mat.
john_petchey
03-11-2006, 16:31
so how much would you charge for the back right quater panel??? do you have any pics??? and where are you from??
http://i92.photobucket.com/albums/l24/petch_02/4329_mod06me31.jpg
john_petchey
03-11-2006, 16:39
this is what i need it for mat;
http://i92.photobucket.com/albums/l24/petch_02/Image371.jpg
http://i92.photobucket.com/albums/l24/petch_02/Image372.jpg
http://i92.photobucket.com/albums/l24/petch_02/4329_mod06me31.jpg
MatBrown
09-11-2006, 12:48
Will try and get some pics, i'm in Hinckley, Leics.
PM me for price.
Mat.
john_petchey
10-11-2006, 16:40
thanks a lot mat look foward to hearin from u
http://i92.photobucket.com/albums/l24/petch_02/4329_mod06me31.jpg
cliolord
13-11-2006, 19:12
williams gearbox JC5 will pay good moeny
MatBrown
13-11-2006, 21:35
No Willy boxes at the mo i'm afraid.
Mat.
David_Harrison
13-11-2006, 22:25
I have 2 JC5's for sale
Rob
I have 2 JC5's for sale
Rob
so what is your name??? david or rob????? :? :roll:
1. Phase 2 door speaker covers
2. Covers that cover the inside of the wing mirrors (you know what I mean
:lol: )
3. Mint A pillar covers
4. Mint steering wheel cowling with oem stalk hole
5. Black "tip" off a wiper arm :lol: :wink:
6. Two matching (non faded red crap like mine) seat belt tensioner clickers
Think thats it for now - enough to keep me entertained for a while!
Christmas discounts welcome :wink: :wink: :wink:
mat, need a set of willy clocks around the 130k mark or less :wink: !!
price please :D
bulletrsi
01-12-2006, 20:24
Have you got anny willy subframes with wishbones and drive shafts in stock if so condition and full price plz thanks
MatBrown
01-12-2006, 23:26
No driveshafts at the mo and the only subframe i have is still attached to the shell i want to sell.
Mat.
What shell is it Mat? Are arches etc all ok?
Paul
MatBrown
04-12-2006, 11:33
Williams 2.
Arches will need painting, they have been treated both sides and one has a hole that needs repairing.
Mat.
What are you after for it? Its just that I already have a williams 2 that is a complete car no problems but the first owner has fitted a sunroof.
What would your thoughts be as the car itself is pretty good in that I am only 3rd owner and has 80k on the clock. Get mixed reports about the sunroof thing! So not sure what to do about getting rid of it or not. May even be selling it anyway!
Thanks for any help and advice, very much appreciated!
MatBrown
08-05-2007, 19:09
Currently have 2 Williams 2's and a Williams 1 breaking.
Mat.
Currently have 2 Williams 2's and a Williams 1 breaking.
Mat.
you been buying new toys mat !
PICTURES
im after the small black bracket that attaches to the starter heatshield if you have one....its the one which fits onto the gearbox to starter
i need a bonnet in good condition and a passanger side wing and front bumper how u fixed. all 449 cheers
MatBrown
12-05-2007, 14:44
I have a bonnet and wing but just sold the bumper.
Mat.
mikeymikewakey
12-05-2007, 15:30
PM'd re drivershafts
Matt,
PMd re willy rack.
Cheers
Steve
bradharding
15-05-2007, 18:12
I still haven't been over Mat, I really should as Hinckley is only down the road for me. You got any F7R's?
MatBrown
16-05-2007, 01:16
Have one in at the mo.
Mat.
Will16valver
16-05-2007, 21:55
Alrite Matt
Ya got a dash Wirin loom? how much?
MatBrown
17-05-2007, 01:17
They are not easy to remove but i do have one.
Mat.
that will be some nice work for you.
P.S whats the column like on this one ????
VIPERONE
17-05-2007, 10:22
ive just scrapped some interior loom....can see it coming back to haunt me...lke the megane box and manifold scrapping did
hiya mate you dont happen to have a valver/williams bonnet do ya, need one urgently! :wink:
Have you got a phase one 16v engine loom?
MatBrown
25-05-2007, 16:40
Not got any good looms at the mo.
Mat.
titcharoony
26-05-2007, 18:44
after the two engine plastic covers. the one with 'elf' over it that sits round the oil filler cap and the one with renault f16 ie writtern on, im presuming it covers the spark plugs, havnt had my williams long mate. cash waiting for the covers! needs the writing in goodish nick tho as mines worn off,
ollymk1escort
29-05-2007, 09:19
Hi matt can you e mail me olly1980@aol.com please in reply to the clio you have for sale as i cant get on the other site at the mo.
cheers
hank3944
01-06-2007, 16:35
do you have an abs sensor?
ratboyvalver
06-06-2007, 19:42
hi mate have you got a set of williams clocks, how much including p&p cheers
martin
MatBrown
06-06-2007, 20:45
Yes mate.
PM'd.
Mat.
Hi Mat
Just wondering if you have an oil pressure sender/switch? and an oil level and temp sensor?
Cheers
MatBrown
06-06-2007, 21:51
I do have them but can't remember if they worked or not.
Mat.
Would it be possible to test them? In no rush for them but it would be helpful to know they work.
Cheers
MatBrown
07-06-2007, 00:31
I'll see what i can do.
Mat.
mat any 449 bonnets/tailgates without dents, not bothered about paint work
Clio-Girl
07-06-2007, 12:23
Hi im after an electric window motor, i cant handle another summer without being able to open the passenger window!! Do you have any and how much?
Thanks
MatBrown
07-06-2007, 21:36
No bonnets but might have a phase 1 tailgate.
I have got a window motor.
Mat.
have you got a decent exhaust heatshield matt cheers
MatBrown
07-06-2007, 22:53
Just sold a decent heatshield.
Will let you know if i get any more.
Mat.
Just sold a decent heatshield.
Will let you know if i get any more.
Mat.cheers matt
drsmith1979
08-06-2007, 00:23
Willy wheels?
Clio-Girl
08-06-2007, 12:18
No bonnets but might have a phase 1 tailgate.
I have got a window motor.
Mat.
How much do you want for the window motor?
jcliff1983
18-06-2007, 23:19
Do you have the parts available for a widetrack? how much?
MatBrown
18-06-2007, 23:57
I do have a widetrack available, PM me.
Mat.
whistler-steve
19-06-2007, 21:38
Matt, do you have the ABS computer (part that goes under the bonnet) for a williams 3 or one that would be suitable?
MatBrown
19-06-2007, 21:41
No ABS parts in stock, sorry.
Mat.
Hi Mat, do you have the small plastic bit that sits between the oil dials and the main dials? Many thanks, Andrew.
MatBrown
20-06-2007, 19:07
Yes mate.
Mat.
whistler-steve
25-06-2007, 22:44
hey, i am looking for a set of front fogs from a williams 3, must be in good condition though as my ones have rotten away.
I am also looking for 1 front and 1 rear renault speaker for the same car
thanks!
Do you have an idle control valves for a '95 valver?
MatBrown
27-06-2007, 18:08
I'm out of ISCV at the mo.
Mat.
Hi Mat, just wondering if you have posted that little black bit that sits between the dials that i bought off you the other day as it has been a while. Many thanks, Andrew.
MatBrown
29-06-2007, 12:40
Hiya,
Will be sending it today as it's the only day i can get to the post office now that i work days.
Mat.
hi matt any luck with the steering column
RSTuning
01-07-2007, 18:30
Hi Mate
Have you got any of the following for a PH1 Valver:
Passenger door trim
Drivers rubber seal that sits on the shell between the door
Drivers and passenger door window surround
Bonnet vent (only the vent part, the bottom i have is fine)
and finally
A set of calipers (front and rear)
Cheers
Paul
RSTuning
01-07-2007, 18:40
A PH2 Grille would be nice too :) Or a mint PH1.
Cheers
Hi mate, have sent you a PM about the main power steering pipe on a valver.
Cheers,
Al
Bailey_1260
01-07-2007, 19:59
Williams box? (or low milage G/C valver one)
cheers
x
rob-legend
01-07-2007, 20:21
u got a williams cat? i may be a bit late to ask :(
fasterthanjesus
02-07-2007, 19:48
hi mate
do you have the sunroof mesh visor? complete with clip attatched? mine has broke (drivers side) willy 3.
thanks
rob-legend
02-07-2007, 22:08
hi mate
do you have the sunroof mesh visor? complete with clip attatched? mine has broke (drivers side) willy 3.
thanks
haha, i thought i was the only one :oops:
Ollyb16v
02-07-2007, 22:28
hi mate
do you have the sunroof mesh visor? complete with clip attatched? mine has broke (drivers side) willy 3.
thanks
haha, i thought i was the only one :oops:
Your not on your own, i didn't break mine though.
rob-legend
02-07-2007, 22:41
hi mate
do you have the sunroof mesh visor? complete with clip attatched? mine has broke (drivers side) willy 3.
thanks
haha, i thought i was the only one :oops:
Your not on your own, i didn't break mine though.
no neither did i, i didnt realise till about 6-7 months after buying it and my girlfriend was all "your old clio didnt have broken ones" smartarse :roll:
hi matt have you got a torx bolt that holds the steering wheel on?cheers matty
matt_clio
04-07-2007, 18:03
hello mate do you have a 16v 449 bonnet and front bumper as i have just crashed mine and am in need asap ! also where are ya based?
cheers matt!
Do you have a white clio valver bonnet please if so can i have a pic. and how much.
Thanks
Steve
bigrich99
10-07-2007, 21:24
You dont by any chance have a drivers side door in monaco 432 blue do you? If you have one in good nick i really need one. Cheers, Rich
bigrich99
10-07-2007, 21:24
pm'd
MatBrown
11-07-2007, 20:40
Nothing in 432.
Mat.
talkingfish
13-07-2007, 17:10
drivers side door trim from a Williams in good condition???????
matts-clio
27-07-2007, 21:46
do you have a full valver front end and if so how much? preferably all in one colour but not too bothered and a price please?
cheers
matts-clio 8)
mk1 clio
29-07-2007, 00:44
Hi Mat,
Have you a set of dials for a valver (speedo, rev counter aswell as oil dials) pref for a ph2 but ph1 would possibly do? something that all the dials are working on, as most of mine have stopped working!
Cheers,
Darren
MatBrown
29-07-2007, 11:18
Think i only have a full set of williams dials.
Mat.
rob-legend
29-07-2007, 11:47
hey man, dya have a williams sump????
MatBrown
29-07-2007, 14:40
No mate, but will have a 16v sump somewhere.
Mat.
bluenose
30-07-2007, 11:25
Pm'd Mat
Justin..
30-07-2007, 19:36
how much for a pair of 16v calipers & carriers?
hi mate
do you have the sunroof mesh visor? complete with clip attatched? mine has broke (drivers side) willy 3.
thanks
haha, i thought i was the only one :oops:
make that 3!!!!!!!!!! lol wouldnt bother putting a new blind in! to much hassle!!
Mat have you got any door speaker covers/grills?
Cheers
Rob
MatBrown
18-08-2007, 18:03
Yes, phase 2's i presume?
Mat.
Yes please didnt know they were different :)
Clio-Girl
28-08-2007, 12:23
Do you have a valver or williams box at all and how much deleivered if you do?? :D
MatBrown
28-08-2007, 23:07
Gearbox?
Afraid not.
Mat.
madman1981
29-08-2007, 21:20
im after the starter motor heat shield with bolts if you have one?
cheers
Mat and news on my bits yet? Need to rebuild the car really lol [-o<
Have you got a set of Phase 2 side bump strips in good condition?
Cheers
Rob
Bailey_1260
01-09-2007, 09:33
im after the starter motor heat shield with bolts if you have one?
cheers
ditto
MatBrown
01-09-2007, 15:47
No starter heatshields at the mo but i have got some bump strips.
Mat.
How much are you wanting for a set of bum strips Mat? :)
MatBrown
01-09-2007, 20:48
Am I invisible? :(
LoL.
Sorry mate, will sort through your list this week i promise.
Mat.
Bailey_1260
01-09-2007, 21:38
How much are you wanting for a set of bum strips Mat? :)
:? lol
mike16valver
01-09-2007, 21:39
:shock: LOL
How much are you wanting for a set of bum strips Mat? :)
:? lol
They're free from me :wink:
YOUR ALL GAY :roll: :lol:
have u got any will engines in at the moment if so how much,milage etc cheers
MatBrown
07-09-2007, 18:31
Not at the mo mate.
Mat.
do you ever have any good shells
Not at the mo mate.
Mat.
When you sort my list out I've got the odd thing to add 8)
MatBrown
10-09-2007, 17:51
do you ever have any good shells
What do you class as good?
Mat.
MatBrown
10-09-2007, 17:52
Not at the mo mate.
Mat.
When you sort my list out I've got the odd thing to add 8)
Got two of the bits you want, need to check on one and not got the other two.
Mat.
Have you got a set of clips for the roof rails?
:D
do you ever have any good shells
What do you class as good?
Mat.
no sunroof not rotten. 8)
Bailey_1260
16-09-2007, 19:26
Valver passengerside driveshaft?
MatBrown
16-09-2007, 19:29
do you ever have any good shells
What do you class as good?
Mat.
no sunroof not rotten. 8)
Got one without a sunroof and a small hole in a rear arch (n/s).
Mat.
MatBrown
16-09-2007, 19:30
Valver passengerside driveshaft?
Yes mate.
Mat.
MatBrown
16-09-2007, 19:30
Have you got a set of clips for the roof rails?
:D
Yes mate.
Mat.
do you ever have any good shells
What do you class as good?
Mat.
no sunroof not rotten. 8)
Got one without a sunroof and a small hole in a rear arch (n/s).
Mat.
pm me a price please.
Bailey_1260
16-09-2007, 19:35
Yes mate.
Mat.
PM price please. :D
And Maxi, what are you plannng now?
a slight re think maybe
a white maxi with a few bigger mods. 8)
Justin..
18-09-2007, 18:14
man you must have money to burn :(
man you must have money to burn :(
not really. but have given up drinking etc and need something to keep me out the pub. think i can do it for around 1500 if i,m careful 8)
do you have any brake parts like this
http://www.williamsclio.co.uk/forum/viewtopic.php?t=26466
MatBrown
11-05-2008, 23:02
Have had a fresh williams in, along with a couple of 16v's.
Mat.
Have had a fresh williams in, along with a couple of 16v's.
Mat.
449 Door!
rob-legend
12-05-2008, 07:44
how much for a willy engine? If the engines knackered, can I have the willy sump? And cya have any cheap scruffy valver bonnets? Cheers :D
any jc5's mr brown in good nick?
white16valver
12-05-2008, 12:58
Willy Driveshafts? Not sure if one of mine is going :?
MatBrown
12-05-2008, 18:34
Have had a fresh williams in, along with a couple of 16v's.
Mat.
449 Door!
Which side?
Mat.
MatBrown
12-05-2008, 18:36
how much for a willy engine? If the engines knackered, can I have the willy sump? And cya have any cheap scruffy valver bonnets? Cheers :D
Willy engine is a good runner with lots of service history - £400
I also have some scruffy bonnets.
Mat.
MatBrown
12-05-2008, 18:36
any jc5's mr brown in good nick?
Yes mate, but not available till the engine has gone.
Mat.
MatBrown
12-05-2008, 18:37
Willy Driveshafts? Not sure if one of mine is going :?
They are reserved for once the engine has gone.
Mat.
rob-legend
12-05-2008, 18:41
any chance of a sump? :oops: :oops: :oops: pretty please, how cheap can you do me a bonnet for? :wink: :D
MatBrown
12-05-2008, 18:45
No williams sumps available, only 16v.
Depends which bonnet you choose.
Mat.
rob-legend
12-05-2008, 21:25
The cheapest valver bonnet you got, as long as it'll go on a car I done mind :D
seanofnp
13-05-2008, 17:17
have any rolling shells? not rotton?
MatBrown
13-05-2008, 18:50
have any rolling shells? not rotton?
Nothing that i would consider sell-able.
Mat.
what u lookin for for jc5 mate if and when lump goes
Clio-Girl
14-05-2008, 13:29
have you got anything naples???
MatBrown
14-05-2008, 18:18
have you got anything naples???
Afraid not, only a passenger door with a bit of a scrape down it.
Mat.
Clio-Girl
15-05-2008, 11:49
have you got anything naples???
Afraid not, only a passenger door with a bit of a scrape down it.
Mat.
damn if you get a naples 'in stock' can you let me know!
white16valver
15-05-2008, 12:43
Willy Driveshafts? Not sure if one of mine is going :?
They are reserved for once the engine has gone.
Mat.
No worries.
I've worked out what it was anyway I think - it appears my tyres weren't actually round... :shock: :?
Hi Matt, do you have a cat for a 16v and how much inc p+p? cheers Dom
rob-legend
06-06-2008, 18:35
would you post out a hub to me? :oops:
MatBrown
06-06-2008, 18:42
Yeah, can post a hub.
Mat.
rob-legend
06-06-2008, 18:53
how much for a non abs drivers side one? for a willy posted to my humble abode? :D
Hi mate,
Do you have a gearstick assembly and the main linkage rod for a wlliams 2? If so how much posted?
Cheers
Martin
MatBrown
15-06-2008, 17:54
Yes mate.
PM'd.
Mat.
MatBrown
15-06-2008, 17:56
Also, Just in today.
Williams 3 breaking for spares, 86k.
Mat.
dont happen to have a 16v engine with ecu 'box and loom?? i reckon im too late :oops:
MatBrown
10-07-2008, 20:48
dont happen to have a 16v engine with ecu 'box and loom?? i reckon im too late :oops:
Yes mate, got a sweet one here.
Apart from the box, dunno if that survived.
Mat.
obie_shaun996
27-07-2008, 17:06
fuel pump mate?u got pm
Ghostvalver
27-07-2008, 19:24
do you have a decent widetrack up for grabs mate?
pm me on here or 16v site use that more.
MatBrown
27-07-2008, 20:29
Think they might be all spoken for, will let you know.
Mat.
do you have a decent widetrack up for grabs mate?
pm me on here or 16v site use that more.
Hi mat do you ever get any tidy xeros parts in like front bumper, wings, bonnet, doors etc?
Long shot i know but its worth a try, let me know if you ever get anything.
Cheers
Dave.
MatBrown
28-07-2008, 00:36
Hi mat do you ever get any tidy xeros parts in like front bumper, wings, bonnet, doors etc?
Long shot i know but its worth a try, let me know if you ever get anything.
Cheers
Dave.
Nothing so far but will keep an eye out.
Mat.
sid_taylor
28-07-2008, 10:53
hi matt got any williams gear boxes if so what condition and how much you want for it cheers
spikey-ben
06-08-2008, 23:18
Hi mat, im after a willy down pipe due 2 sum numptey welding the cat to it. Can you help?
Cheers Ben
MatBrown
07-08-2008, 20:19
Hi mat, im after a willy down pipe due 2 sum numptey welding the cat to it. Can you help?
Cheers Ben
Think i have just sold my current spare one, will let you know when i shift the next engine.
Mat.
spikey-ben
07-08-2008, 20:59
much appreciated m8 if you could do that.
Ben
bopper54
01-09-2008, 20:28
by any chance have u ot a steering rack for a 1995 1.8 16v???? and also engine dress covers (plug lead cover ect)??? If so msn me bopper54@hotmail.co.uk
MatBrown
01-09-2008, 21:14
Added you on MSN.
Mat.
nhasey1602
10-09-2008, 19:36
do you have a phase 1 boot strip and parcel shelf mate? got to be mint tho
cheers mate
benjah23
13-10-2008, 18:22
pm'd
Got ant 432 shells? Either 2.0 or 1.8? 1.8 preferred.
Let me know what you have.
MatBrown
20-10-2008, 19:00
I have but it's not brilliant.
Mat.
rickyquicky
16-11-2008, 18:09
hi mate, im after a will 2 downpipe...
and some hinges for the glovebox :oops:
I need This part x2
http://i167.photobucket.com/albums/u126/mr7t6/DSC00264.jpg
http://i167.photobucket.com/albums/u126/mr7t6/DSC00263.jpg
Thanks
MatBrown
29-11-2008, 22:23
PM'd.
Mat.
mat have you got a decent heater control units? my blower has stopped in the williams and im pretty sure thats what has caused it
MatBrown
02-12-2008, 23:06
The panel on the dash above the stereo?
Mat.
yea thats the one mate, ive heard that the connectors on the fan blower switch melt which stop it from working so if you have a good working one ill have it :D
rickyquicky
22-12-2008, 13:51
hi mate,
do you have a decent (ish) set of willy wheels?
MatBrown
22-12-2008, 20:09
Yes mate.
Mat.
Hello Matt,
Any bonnets or front bumpers knocking around?
Thanks
Steve[/url]
MatBrown
23-12-2008, 18:02
Yes mate.
Mat.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.