View Full Version : **16v x5, Williams x3, 172 x2 and 182 Breaking for spares**
Mr Brown would you happen to have a dashbord wiring loom at all ?
MatBrown
29-12-2008, 19:25
Hmmm,
They are a pain to remove.
But do have one yes.
Mat.
robertgraham
30-12-2008, 00:56
Any willy g/boxes?
MatBrown
30-12-2008, 20:12
Just sold the one i had.
Mat.
How much for the wiring loom dear sir?
Hi Matt
Do you have a pair of tidy willy doors. if so how much?
Cheers Max
FQ200turbo
15-01-2009, 20:23
how much for the williams driveshafts and hubs ?
Magnumpi
24-01-2009, 20:04
Hi Mat, do you have any Williams manifolds? Even one maybe slightly damaged as i'm going to be cutting it up for a Volvo conversion.
Cheers
Will16valver
26-01-2009, 18:56
y are you cutting up a willy manifold for a volvo engine? just get a custom down pipe, problem solved 8)
Magnumpi
06-02-2009, 21:38
y are you cutting up a willy manifold for a volvo engine? just get a custom down pipe, problem solved 8)
It's a F7R going into my Volvo thats why i need the manifold.
Cheers Mat it arrived today excellent service.
Nice one
Williams Wishbones?? any condition, gonna Rebush em
heya matt, what condition are the shells in that you have left?
desperately in need of a good condition shell. rust on rear arches is fine.
any colour :D
cheers
Tim
WillyRep
07-04-2009, 18:55
hi is there any interior knocking about bincluding door cards.
cheers
MatBrown
07-04-2009, 19:34
Yes mate.
Mat.
whistler-steve
23-04-2009, 09:33
Hi Mat
Do you have a drivers door in 432 kicking around? Has to be in decent condition and not rusted through. PM me?
Steve
MatBrown
23-04-2009, 21:26
I do have one but not sure how good it is.
Mat.
whistler-steve
24-04-2009, 09:46
i'm assuming you have a breakers yard? any chance you could PM me your postcode and let me know what condition that door is in?
MatBrown
24-04-2009, 19:16
Not quite.
But postcode coming your way.
Mat.
got a working crank sensor?? please mat
MatBrown
27-04-2009, 18:13
Yes mate.
Mat.
thaijedi
27-04-2009, 18:47
matt do you have a williams flywheel and a low temp thrmo stat?
MatBrown
27-04-2009, 19:39
Yes mate.
Mat.
thaijedi
27-04-2009, 20:26
wicked is that yes to both..?
How many pennys do you want. Im in Basingstoke hampshire if your not to far then i could come and collect
MatBrown
27-04-2009, 23:13
I'm in Hinckley, Leics.
Mat.
thaijedi
28-04-2009, 09:46
ok well how much would you want for the parts...
Hi mat do you have a metal centre cap for this please
http://i568.photobucket.com/albums/ss124/phil74/wheels1.jpg
If so, how much thanks phil 8)
MatBrown
01-05-2009, 19:55
Not got any any of those at the mo.
Mat.
Cheers mate do you know if and when you'll have any got 3 already thanks again
x_tara121_x
02-05-2009, 09:56
have you got a decent heater control units? the blower on the valver is dead, circuit board has all melted inside!! looks like its been on fire at some point, used to be a good smack n it would start workin again but not no more
MatBrown
02-05-2009, 11:10
Cheers mate do you know if and when you'll have any got 3 already thanks again
I need a full set myself so won't be for a while.
Mat.
MatBrown
02-05-2009, 11:10
have you got a decent heater control units? the blower on the valver is dead, circuit board has all melted inside!! looks like its been on fire at some point, used to be a good smack n it would start workin again but not no more
Yeah, i can sort you out with that, do you need the plug as well?
Mat.
Cheers mate do you know if and when you'll have any got 3 already thanks again
I need a full set myself so won't be for a while.
Mat.
What do you need for a full set i have 3 plastic ones and 3 metal ones but only need one metal one
MatBrown
02-05-2009, 18:24
I don't have any, so need a set of four.
Mat.
nuttynutter123
05-05-2009, 11:40
hi mate have you got any phase 2 rear quarter bump strips (moulds)? need both sides.
If so how much delivered?
Cheers
MatBrown
05-05-2009, 21:46
Would want to sell them as a full set really.
Mat.
nuttynutter123
06-05-2009, 08:59
no worries, i have some lined up now thanks.
Do you have a infra red reciever for the central locking available? if so how much delivered?
Cheers
MatBrown
02-06-2009, 22:57
I'm attending FCS this year so if there is anything you want/need give me a shout and i will try and bring it along with me.
Mat.
Hi Mat
How much for a offside headlight for willy 2, delivered
Cheers Max
smithyone90
10-06-2009, 16:48
standard air box for 16v dunno if theres a difference with the willy 1 from 16v?! how much if u do have 1 and where are you please. ta
MatBrown
10-06-2009, 21:32
Based in Hinckley, Leics but don't think i have any standard airboxes.
Mat.
Hello mate, do you have any willy shocks for sale?
MatBrown
04-07-2009, 08:47
Front or rear?
Mat.
hi matt. i have a williams 2 and need a steering wheel ,front fogs ,and passenger side wing mirror.thanks.
MatBrown
05-07-2009, 14:05
Might struggle with the fogs but should be ok with the other bits.
Mat.
i have minty mint gen valeo fogs for sale mate, pm'd
m4rk3014
07-07-2009, 14:33
Hi matbrown ,please see http://www.williamsclio.co.uk/forum/viewtopic.php?t=36180 can you help me with this mate if so How Much inc P+P ,thanks Mark
jonofdoom
14-07-2009, 02:14
Hello...
I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)
jonofdoom
14-07-2009, 07:25
Hello...
I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)
And a thermostat / housing too... Maybe a couple other bits as I figure out what's needed.
MatBrown
14-07-2009, 16:19
Hello...
I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)
And a thermostat / housing too... Maybe a couple other bits as I figure out what's needed.
Yeah, have both of those.
Mat.
let me know as soon as you have a rolling shell with doors please mr brown :)
valver preffered :)
hi Mat
i am after a 16v (or williams of they are the same) coolant temp sensor and plug (wiring for it aswell if poss but not 100% necessary)
monies waiting :)
MatBrown
11-08-2009, 21:43
New stock always coming in.
What you after?
Mat.
MatBrown
12-08-2009, 18:37
Yeah, got one off and ready.
Mat.
Yeah, got one off and ready.
Mat.
Does it come with discs / caliber and the cast hubs im after...? pm with price etc :D
MatBrown
12-08-2009, 20:16
No calipers fitted. but has some discs fitted and the hubs are on it.
Mat.
No calipers fitted. but has some discs fitted and the hubs are on it.
Mat.
pm
simonr85
24-08-2009, 16:02
PMd you mat about rear brake brackets
Have you got any fuel lines that run past PAS pump as sprung a leak! CHeers!
MatBrown
24-08-2009, 18:40
Have you got any fuel lines that run past PAS pump as sprung a leak! CHeers!
Yes mate,
Have you got a plastic fuel rail or metal?
Mat.
It is a metal fuel rail off a williams 3!
Bloody car, dont want to spend much as will be breaking it soon or just getting rid as is so would be great if you can help.
Let me know how you want paying and I will send cash asap as car is sort of abondoned outside the house. Best not upset the neighbours just yet as no doubt a few curtains will be twitching as I break it!
Cheers Mat
Any manifold heatshields yet? :cry:
MatBrown
25-08-2009, 18:06
Nothing much good.
Mat.
nuttynutter123
01-09-2009, 21:46
hi, have you got the little tee peice type connectore that the flow fuel pipe connects to the injector rail?
MatBrown
01-09-2009, 22:01
Hmm, the fuel pipes normally just clamp onto the rail?
Mat.
It is a metal fuel rail off a williams 3!
Bloody car, dont want to spend much as will be breaking it soon or just getting rid as is so would be great if you can help.
Let me know how you want paying and I will send cash asap as car is sort of abondoned outside the house. Best not upset the neighbours just yet as no doubt a few curtains will be twitching as I break it!
Cheers Mat
HI Mat,
Fuel pipes arrived safely, many thanks for a good service and huge saving on yet more rip off renault prices!
Paul
nuttynutter123
02-09-2009, 07:53
Hmm, the fuel pipes normally just clamp onto the rail?
Mat.
ill take a picture and post it up later lol
nuttynutter123
02-09-2009, 08:54
see attach
whats the heck is that thing?! :shock: :? :lol:
busterhymes
02-09-2009, 09:38
looks a bit like an inline pipe connector :?
nuttynutter123
02-09-2009, 10:12
note that the fuel pipe next to it isnt connected to anything... thats the thing it should be connected to. this is a phase 2 clio as well... which i think is a different set up to the phase 1.
the late phase 2's had plastic fuel rails i believe, but the connectors and fuel lines were all the same as far as i'm aware
busterhymes
02-09-2009, 11:29
ahh plastic fuel rail that makes sense never seen that my williams has alloy rail and myrecently broken williams 3 was alloy too :?
yeah its a plastic rail but the connector is still strange, pretty sure the plastic rail had exactly same connectors as the metal one, so not sure what that t piece thing is?
busterhymes
02-09-2009, 13:01
plastic rail thats nasty :wink:
nuttynutter123
02-09-2009, 15:47
no one seen them before then lol?
MatBrown
02-09-2009, 17:34
Yeah, i know what you want.
The plastic rails have push-on connectors on the end of the lines.
Not sure if i have any spare ones though.
Mat.
Hi mate,
Have you got any exhausts for sale, looking for a S/S system, small diameter tailpipe.
Oh and also yellow fog's!
Any help?
Thanks
MatBrown
02-09-2009, 21:59
Not got anything i would class as small diameter mate.
Got some yellow fogs but they have corroded slightly.
Mat.
nuttynutter123
03-09-2009, 09:28
Yeah, i know what you want.
The plastic rails have push-on connectors on the end of the lines.
Not sure if i have any spare ones though.
Mat.
can you let me know if you have anything please mate.
if not how much you want for a fuel rail?
badger bill
11-09-2009, 20:29
do you have a radio, drivers door trim and rear bumper rubber trim for a W2? If so can you let me know how much?
Cheers
BB
hi.do you have steering wheel original and two front fogs in good condition.thanks
i am after original steering wheel and 2 front fogs in good condition.thanks
Need willy or 16v mint subframe.....
demuppetiser
07-10-2009, 20:53
Do you have a standard williams airbox??
Thanks
MatBrown
07-10-2009, 21:31
Hmm, not sure, will check the couple of new arrivals.
Mat.
MatBrown
10-10-2009, 13:20
Yes mate, i have got an airbox available.
Mat.
you got any exhausts other then scorpion cat backs in?
MatBrown
11-10-2009, 20:18
Got a powerflow, magnex, standard.
Mat.
mat you have a pm from me :)
Do you have a JC5 gearbox?
MatBrown
17-10-2009, 19:30
Not at the mo mate.
Mat.
Patrick_g46
24-10-2009, 13:33
Do you have a good condition original backbox? How much?
Cheers
Patrick_g46
24-10-2009, 13:35
Oh and also a set of horns as mine have died!
MatBrown
24-10-2009, 18:42
Got some horns for sure, might have a backbox too.
Mat.
Phase 1 ( i think?), passenger side wing mirror glass?
MatBrown
02-11-2009, 00:23
Yes mate.
Mat.
glyn211269
09-11-2009, 02:58
Any chance of the two standard air filter induction pipes for a Phase1 Willy?
7700854534 and 7700854533 i think...
Mat do you have any front williams suspension by any chance ?
Also do you know if i can put valver springs on williams struts ?
Cheers
Clio_GTT
09-11-2009, 16:34
Mat do you have any front williams suspension by any chance ?
Also do you know if i can put valver springs on williams struts ?
Cheers
Yup 16v springs fit on willy shocks
Cheers for that mate.
Just got to search for some willy shocks and driveshafts now....Cant find them anywhere :(
hello, have you a power rack for a williams 3, thanks mem
MatBrown
13-11-2009, 00:14
Not at the mo mate.
Mat.
see attach
I've got one of these plastic rails spare with the fuel lines if you need it.
The 'T' piece is there as the other end of it is the feed for the 5th injector, rather than taking it off the end of the rail.
Mark E-J
21-11-2009, 14:13
Mat
how much for a std complete airbox for my williams 3 delivered?
Mark E-J
21-11-2009, 15:03
Mat
how much for a std complete airbox for my williams 3 delivered?
Also needed electric mirror control switch and electric switches for windows lights must be working on them please mate total price?
Drivers side 432 wing and mirror if possible please mate.
1995clio16v
17-03-2010, 15:54
You got any Williams ARB's?
MatBrown
17-03-2010, 16:49
Not at the moment as i try and sell the widetrack complete.
Mat.
1995clio16v
17-03-2010, 20:22
OK, well Ill have first dibs on one if one pops up please.
Should be around 3 weeks before I build front end back up.
have you got a good williams 3 body shell?
MatBrown
22-03-2010, 23:43
No mate.
Mat.
ratboyvalver
26-03-2010, 19:22
have you got R19 16v throttle body ph 2 grill cheers
MatBrown
26-03-2010, 19:37
Got a clio grille but no 19 TB's.
Mat.
have you got a good williams 3 body shell?
is that a trick question lol
MatBrown
26-03-2010, 21:10
Oxymoron? :lol:
Mat.
majestikmoose
22-04-2010, 10:47
Hi Mat,
Have you got a drivers side door lock mechanism/actuator
have you got R19 16v throttle body ph 2 grill cheers
Think there is one in a scrapyard up the road...R19 16v Chamade.
MatBrown
22-04-2010, 16:59
Hi Mat,
Have you got a drivers side door lock mechanism/actuator
Yes mate.
PM coming.
Mat.
majestikmoose
10-05-2010, 10:19
Hi Matt, Im after a heater blower for a williams 2 If you have one, Cheers
MatBrown
10-05-2010, 18:22
Yes mate.
Mat.
Hiya, have u got front bumper for williams 1 clio in good condition?
MatBrown
08-06-2010, 17:12
I've got one in fairly good condition.
Mat.
At this moment in time i am after the following in good condition...
f16ie cover
449 drivers wing
willy 1 front bumper
willy 1 side strips
gear knob
parcel shelf & suit carrier
pm me if any are available!
thanks,
Hi mate do you have Williams 1 door strips??
MatBrown
23-07-2010, 14:31
Not at the mo mate.
Mat.
ratboyvalver
24-07-2010, 18:28
hi buddy you got a valver front brake calipers?
MatBrown
24-07-2010, 20:08
Yes mate.
Mat.
MatBrown
03-10-2010, 16:46
Also got a Mk2 172 breaking.
http://i202.photobucket.com/albums/aa224/matrickbrown/172breaking1.jpg
Mat.
matt, needing a pair of williams rear brake calipers asap!
The handbrake MUST work on them lol
Dunc
fasterthanjesus
18-11-2010, 22:19
need rear rails, both sides.
need front hubs with abs sensors.
need rear axle and associated parts to torsion bar. mine completely seized.
need front suspension, mine seized.
have box to put on boat. central location.
helpz!
MatBrown
18-11-2010, 22:30
Rails?
Not got any ABS hubs left at the mo.
Front suspension your better off getting new stuff from renault.
Mat.
rctempire
22-11-2010, 18:22
Im After
16v radiator
Rear engine mount (dog bone)
Front discs, front pads?
Clutch cable.
Hi matt,
Im after a complete williams drivers side hub please. Can you help?
Cheers
Tim
07971 050 555
phantome46
25-11-2010, 11:04
Matt - have you got a phase 1 aux fuel pump yet?
Thanks
MatBrown
25-11-2010, 18:16
I have one but its not working, but the pipe connections are all good though so you could swap the motor from yours if it works?
Mat.
Mat,
Got car running after speaking to you, appears the pump had got stuck.
How much for a Fuel Pump?
Regards,
Jamie
Still after a rust free boot if you get any in, 449 blue a bonus.
MatBrown
11-01-2011, 18:23
Got phase 1 boots but the phase 2's seem to rust more.
Mat.
I didn't even realise there was a difference. I'll perhaps check some pics. Will drop you a PM aswell - if a phase one will fit my ph2 williams 2 then I'm happy, the lock mechanism is no longer attached on mine due to crumblization!
Mat, do you happen to have a good plastic brake line cover, that runs under the floor passenger side ? Cheers Jock.
MatBrown
14-01-2011, 17:18
I should think so mate.
Mat.
cliowilliams174
15-01-2011, 15:04
hi do you have an alternator for williams? cheers
MatBrown
15-01-2011, 19:16
No good ones at the mo.
Mat.
quadra28
18-01-2011, 18:38
matt do you have a engine williams f7r 700 ?
ratboyvalver
13-02-2011, 19:44
mat you got an oil level and temperature sensor please :D
ratboyvalver
13-02-2011, 19:51
and a tps sensor :D
hi you got any front bumper how much posted st3 3hy
reasonable condition aslong as it fits right and any scratches can be rubbed down and re painted thanks
Got a lock set and a dipstick tube?
MatBrown
23-02-2011, 18:00
Front bumper would need collecting from Hinckley.
Got a lockset but the boot lock doesn't work.
Will have a look for a dipstick tube.
MatBrown
25-02-2011, 23:15
Have got a dipstick tube too.
williams0083
02-04-2011, 15:24
Hi have you got a set of standard springs?
cheers
MatBrown
02-04-2011, 16:25
Yes mate.
Hi Matt, am still holding off on a boot, let me know if you still on for sorting one or there's one on ebay I'm going to buy and spray. Cheers.
MatBrown
14-04-2011, 18:36
Sorry mate,
Did get your email but forgot to reply, planning to come up one weekend when i get chance.
ratboyvalver
14-04-2011, 20:00
you got a tps fella?
MatBrown
14-04-2011, 23:04
Yes mate, but only sell them complete with throttle body.
ratboyvalver
15-04-2011, 16:00
cool how much for a tb with the tps fella
Sorry mate,
Did get your email but forgot to reply, planning to come up one weekend when i get chance.
That's cool, Still in no rush just was worried you might forget, been a while :)
cams + pulleys from williams or 16v engine ? how much ? thanks.
MatBrown
05-07-2011, 19:24
I have some from a 16v, would have to check postage costs though.
Vandella
16-07-2011, 14:53
Hi Matt, Im After sum rear break callipers for my willy.. any chance u may still have? also a grill from a willy 2? Cheers mate
MatBrown
16-07-2011, 16:36
Got some calipers but out of grilles at the mo.
im looking for a full lock set with keys and the blip thing on roof ↲Also ignition and anything else needed for ignition to work↲And may need the immob disable lock barrel and key ↲Car is fully locked up and iv got no key or immob fob so hoping changing everything will get it running again ↲Will i need to do more ?↲Cheers dave
hi have you decat pipe and a suttle back box? (not loud)
MatBrown
20-07-2011, 22:53
im looking for a full lock set with keys and the blip thing on roof ↲Also ignition and anything else needed for ignition to work↲And may need the immob disable lock barrel and key ↲Car is fully locked up and iv got no key or immob fob so hoping changing everything will get it running again ↲Will i need to do more ?↲Cheers dave
Think i have a lockset available, but would need to check the car at my mates house.
MatBrown
20-07-2011, 22:54
hi have you decat pipe and a suttle back box? (not loud)
No de-cat, and i might have a magnex back box.
im looking for a full lock set with keys and the blip thing on roof ↲Also ignition and anything else needed for ignition to work↲And may need the immob disable lock barrel and key ↲Car is fully locked up and iv got no key or immob fob so hoping changing everything will get it running again ↲Will i need to do more ?↲Cheers dave
Think i have a lockset available, but would need to check the car at my mates house.
could you check please mat
:)
thanks
dave
How much for the magnet backbox mate if you do have one delivered
Martin
Matt, do you have a rear bumper and how much mate?
MatBrown
27-09-2011, 21:59
Yes mate, but would need collecting.
JonnyGee
28-09-2011, 00:53
would u have a williams arb and mounts ect?
and williams track control arms or full rack please?
cheers
MatBrown
28-09-2011, 16:29
I have an ARB, Wishbones and rack, no driveshafts though.
steveoegan
15-12-2011, 18:12
hello mate, got any willy 2 bootlids? will happily come and collect! cheers mate
FM696269
15-12-2011, 21:07
hey mat
could you do me a pricecheck on these items please mate, just wanna see if its cheaper for me to buy the spares or buy a write off 16v n strip it for what i need or buy a 1.2/1.4 then get 2 recliner bucket seats.
16v seats and rear bench
rear seat belts
interior plastics (A post pieces across to B post, then rear quarter plastics where the speakers are, centre console plastic where the gearstick is)
parcel shelf
boot carpet
tailgate plastic (inner)
cheers mate
MatBrown
16-12-2011, 10:29
hello mate, got any willy 2 bootlids? will happily come and collect! cheers mate
Nothing rust free.
Me need Willy 1 drivers side bumpstrips!
MatBrown
16-12-2011, 13:09
Good luck! LoL.
MatBrown
18-04-2012, 19:52
Just a small note, i currently have 5 16v's, 3 Williams, 2 172's and a 182 i'm breaking for spares.
So if you need ANYTHING, there is a good chance i've got it.
Your one-stop clio shop! LoL.
Elaine1983
18-04-2012, 23:50
Hi, im after a steering rack for my Williams 3 if u have one? Thanks
gareth_bowler3
23-04-2012, 19:41
you got a willy 1 boot lid, in ok nick?
You got the pas pipe that runs down the back of the rad? Mine popped! after rubbingon the fan housing.
MatBrown
14-06-2012, 17:02
There's two different sorts, got a picture?
passenger side 172 door pull mate to open the door from inside?
mines a phase 1, are they same on phase 2 if thats all you got
MatBrown
14-06-2012, 17:49
The handles are silver on the phase 2.
no phase 1's? or can u hook me up with set of two phase 2 for right price mr b?? presume same mechanism n fitment?
MatBrown
14-06-2012, 20:08
No phase 1's i'm afraid.
£10 for the pair of phase 2's.
bring to FCS fella? and defo same fitment on the wire mechanism?
cheers
Ben
morley2212
21-06-2012, 18:17
hey, im after the engine loom out a K reg 1.8 16v.?
Can barely see the pipe starts/ends, havent taken the car apart yet trying to get the parts before I end up with bits eveywhere and no bits to put back in, I can try and take a pic of it in the car, but thats prob easier said than done. I think its the one that comes off the pump, under the inlet manifold and then drops down the back of the rad and connects to another pipe that goes round the passenger side of the car.
BazEdgar
21-06-2012, 22:08
Hi,
I've just bought a williams 1. It's perfect, except for a missing hub cap. I don't suppose you've any spares?
Thanks
Baz
MatBrown
23-06-2012, 09:26
hey, im after the engine loom out a K reg 1.8 16v.?
Don't think i have any good ones mate.
MatBrown
23-06-2012, 09:27
Can barely see the pipe starts/ends, havent taken the car apart yet trying to get the parts before I end up with bits eveywhere and no bits to put back in, I can try and take a pic of it in the car, but thats prob easier said than done. I think its the one that comes off the pump, under the inlet manifold and then drops down the back of the rad and connects to another pipe that goes round the passenger side of the car.
The one that comes out the pump is all metal?
MatBrown
23-06-2012, 09:27
Hi,
I've just bought a williams 1. It's perfect, except for a missing hub cap. I don't suppose you've any spares?
Thanks
Baz
Yes mate.
BazEdgar
23-06-2012, 14:24
Yes mate.
Brilliant, Whereabouts are you?
^ Hinckley
Mat have you got the brake switch that attaches to the brake pedal pleasE?
The one that comes out the pump is all metal?
Il grab pictures of what I can see. renault have taken a month so far to get me a pipe, and still have no pipe....
MatBrown
01-07-2012, 09:30
Brilliant, Whereabouts are you?
As Dan said, I'm in Hinckley, Leics.
Switch is no problem dan.
zmaster2k
01-07-2012, 11:21
Mat
Need some Rubber!
Specifically, weather strips, door seals, windw rubbers....
what ya got?
3525
Have you got this pipe?
Also a the red throttle postion sensor? the sleeving on the wiring on mine has perished and is falling off.
MatBrown
01-07-2012, 13:40
The rubber one? Will have a look. Have got a throttle body with TPS attached.
MatBrown
01-07-2012, 13:42
Mat
Need some Rubber!
Specifically, weather strips, door seals, windw rubbers....
what ya got?
PM or text me mate, but some of them might be difficult to post.
Yeah the rubber one, any idea what you want for it if you have one?
How much for the throttle body? only really need to sensor.
ratboyvalver
29-07-2012, 23:10
williams wishbones and arb :)
MatBrown
31-07-2012, 22:37
Yes mate.
will_dewis93
05-09-2012, 00:39
Any chance you'd part with a reciever unit for the central locking, if you've got one lying about? (And in awnser to your thaughts. Yes, my sunroof leaked..)
MatBrown
05-09-2012, 07:55
You need a matching pair of receiver and sender.
And I've not got any spare at the mo.
Kris2012
10-11-2012, 15:33
Have you got:
1) The red top cover for the battery terminal
2) N/S/F camber bolt washer.
3) Standard airbox including connecting pipes to replace induction kit.
MatBrown
11-11-2012, 10:20
Got the cover and the airbox.
Camber bolts are not standard though?
Kris2012
11-11-2012, 12:31
Great. Are they good condition? Any chance of some pics?I didn't know about the camber bolts. I'll have to change that!Cheers
I completley forgot about those dash strips - can I pay for them? Do you still have them. Need 2 x dash and steering insert. Standard 182 if you have them
MatBrown
13-11-2012, 00:46
Think I still have some.
Kris2012
26-11-2012, 10:51
I'll take the cover please. Is the airbox faded or in decent condition. I'm looking to tidy up my engine bay.
MatBrown
26-11-2012, 11:07
Air box should come up with some dressing.
anyideas
26-11-2012, 16:22
Matt
Have you got a heat shield for the engine bay?
Vandella
26-11-2012, 18:00
any bumpers in good nick available mat? or what the best way to get the bump strips back to black?
MatBrown
28-11-2012, 23:40
No decent bumpers at the mo, Wurth do a plastic dye though.
Kris2012
29-11-2012, 09:59
Thanks Mat.
I'll take the red battery terminal cover for now then. How much and where shall I send it?
Kris
robi1000
07-01-2013, 22:14
I need oil temp/level sensor and that alu bracket that is bolted on the block (teeth for aux tensioner must be in good condition). I'm also after F7R 714 dip stick.
Williams gearbox request please
BazEdgar
02-02-2013, 14:16
Hi Matt
I don't suppose you've got a williams passenger door? Thanks to some prick caving mine in overnight and driving off, I could use one
Thanks
MatBrown
02-02-2013, 21:49
Hi mate,
Nothing much good as most of my panels got damaged in the hail storm last year.
I need replacement front shocks and springs for my williams, have you any of these if so at what price. im based in lecis so collection no problem.
thANKS
Hi do you have a spare gearbox for a williams?
fasterthanjesus
07-06-2013, 06:29
do you have a rear axle for williams with torsion setup intact? not bent!
Woznaldo
29-06-2013, 02:34
Hi, I'm looking for a Williams front Anti-Roll Bar in decent condition.
I'll be in UK in the next two weeks.
MatBrown
29-06-2013, 09:52
They all have surface rust?
Hi I am after a few bits if you have them:
door solenoid for passenger door (i assume either will fit),
the plastic cover that fits on the rear wiper arm to hide the nut,
the smoked plastic cover that sits on the roof near the interior lights,
Both door trays (what condition are the ones you have)
Thanks
Ste
SIMONCLIODIMMA
11-07-2013, 20:52
Hi Im looking for the drivers side engine mount for Clio williams /16v (the part that fixes to to chassis with the powersteering bottle) and the full bottom engine /gearbox mount (dog Bone) If you have any can you call me on 07989627736
may want other bits as well.
Cheers
Simon
Do you have a Williams 3 rear axle with the abs sensors?
jackieoffen
19-08-2013, 13:02
Hi there am in desperate need of a working speedo/clock unit...
Do you have the tailgate bootstrip?
MatBrown
27-09-2013, 12:09
Which style?
The part number is 7701467225 the one that williams have.
Do you cambelt plastic covers?
hi mat im after a few bits wonder if can help.
clio 1.8 16v bonnet vent [just the external part]
clio 1.8 16v reverse relay [one under glove box]
clio 1.8 16v indicator relay [one under glove box]
clio 1.8 16v map sensor bracket
cheers mate.
glyn211269
12-05-2015, 00:33
Hi Mat, I don't suppose you have any Williams Speedlines at all?? Or anyone else who has a spare set???
hi managed to get hold of the other stuff, any chance you have a front subframe for a clio 16v mk1 for sale?
cheers,
"is this guy still alive?"
elitesion
07-09-2015, 19:16
I'm after the bump strips for a williams 2.
Hope you can help?
white2lsr
17-01-2016, 14:45
Hi, im after a N/S/R bump strip for a phase one valver if you can help?
Hi do you have a fromt bumper for a clio 182 FF in black gold?
MatBrown
14-06-2016, 00:22
I can be contacted easily on Facebook.
https://m.facebook.com/Clio-Specialist-843705932412754/
Elijah48
31-10-2016, 19:01
Do you have the plugs that go into the coil module please? if not a loom please?
Nickysteveo
15-11-2017, 19:12
Hi
I have a Williams 1.
Have you got any glass for the fog lamp?
Need a gold hub thingy for one of the wheels, it went missing have you got one any idea where I can source one?
cheers
Nick
ianbirch
15-11-2017, 19:46
To get hold of Mat Brown see 3 posts above this one.
Regards Ian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.