View Full Version : Got a new manifold for weekends RR
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7969136212
Impluse buy :D
got it for £280,..... he only lived up the road....blagged him to finish it early so i could get it fitted for weekend...really top bloke!!!!(he wants glowing manifold pics :twisted: )
Fitting it tomorrow with gibbo ready for sat. much better than my blowing valver one.
Ready for a remap now :wink:
Mark_Ritchspeed
21-04-2005, 23:45
Are they significantly better than a Willy or 16v manifold ?
Looks well smart though. :D
I have just fitted one of these to my williams and OH MY GOD are they better !!!!
definatrly worth while mod.
Supersprint have some RR figures for these, full system replacement over the standard valver manifold/zorst is 11bhp or soemthing and 15nm of torque.,.. taken from the supersprint website.
http://www.supersprint.com/homeuk.htm
Are super sprint exhausts pricey? fancy a straight through middle section.
yes... www.motorsportworld.co.uk sell them...
looking at 120quid for a mid-section... i will be ordering a mid-section and back section very shortly :D
Mark_Ritchspeed
22-04-2005, 10:44
Keep us posted how it performs. Do you have any RR results pre-Supersprint to compare to?
good buy mate. iv been lucky in the past, and picked up the first one for £150, and the second for £180. made a nice difference tho on both cars, but especially to the noise!!!
im a bit worried about the noise levels a full supersprint system is going to create actually.
Mark: figures are available on the supersprint website.
Slithers
22-04-2005, 17:21
Good effort winston that will look pimp daddy mac in you engine bay m8 , im considering gwtting one if i find out that my downpipe is knakered on monday.
are you comin down mine tonight Winston ?
Good buy Winston they are deffo good bits of kit. :)
I ****ING HATE EXHAUSTS!!!!!!!!!!!!!!!!!!!!lol
Had good day ish.......fitted the manifold, was blowing abit, stopped it blowing.
But...... I nearly bent my middle siliencer in half :shock: looks very well...bent (started blowing again Grrrrrr) ......long story but looks like i'll be getting the straight through system sooner rather than later.
Not good timing for the rolling road :roll:
VIPERONE
22-04-2005, 23:38
lol.. there was a bit of miscommunication.. and the master jack was lowered before the secondary jack had been removed.....
however, manifold fitted, just a few blowing problems,..nothing a gaskets and gungum wont sort....
Winston call powerflow at burnley, see what they will charge to knock a mid section up... wont be much matey...
rofl i was bidding on that then my bid got canceled :(
so now i know why lol!
oh well
how did you manage to bend the centre section ?
Good luck Winston, looks like a nice and hopefully powerful addition to your armoury :wink:
VIPERONE
23-04-2005, 15:35
the secondary jack was placed under the midsection muffler and winston released the master jack which dropped the car...the secondary jack bent the mid sec..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.