View Full Version : FAO Lunner/RSI Dave/Any RSI Owner
Hi Guys,
if anyone has (or would be willing to go and take some), i'd like some pictures if the routing of an RSI engine loom. In particular where it sits over the various engine components, how it routes to the ECU, how it routes to the car loom etc etc.
Much appreciated if you can help! :)
i would help but not to sure where most of the loom goes myself!
From what ive seen (could be wrong) the majority of the wiring runs down either side of the bay, and up accross the back of the back next to the inlet manifold.
Other than that from the battery there is some wiring which comes down and heads towards the back of the bay very low down.
Thats no problem m8...any pictures whatsover would be a great help as i'm wiring a loom back up to an engine soon - its the first RSI engine i've seen so don't have a clue! lol :)
ill get some in a bit, not long got in so engine is quite warm
Bear in mind most of the wires in my engine have been covered with green covers :lol:
Pics as requested, not sure if they will help or not and some are blurry as it was raining :roll:
Drivers side wing
http://www.zen32679.zen.co.uk/Loom/01010001.JPG
Above the inlet
http://www.zen32679.zen.co.uk/Loom/01010002.JPG
Passenger side wing
http://www.zen32679.zen.co.uk/Loom/01010003.JPG
From battery
http://www.zen32679.zen.co.uk/Loom/01010004.JPG
Underneath Battery (Upside down)
http://www.zen32679.zen.co.uk/Loom/01010005.JPG
http://www.zen32679.zen.co.uk/Loom/01010006.JPG
HT Leads
http://www.zen32679.zen.co.uk/Loom/01010006.JPG
Coil
http://www.zen32679.zen.co.uk/Loom/01010006.JPG
Excellent - thats a big help!
Many thanks guys! :)
Do you have any of the ISCV and piping to/from it?
clio_rsi_turbo
27-09-2006, 18:26
if you need any rsi parts give me a shout, i still have my rsi engine hanging around in the garage.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.