PDA

View Full Version : 92 1.8 16v Clio



arj256
08-05-2006, 12:59
Right after a new purchase i no longer need my valver.
I have done alot of work since i bought it, and would say that it is in good condition now.

Since i bought it i have had the arches and backs of the sills done at a bodyshop. And when i got it back, i then undersealed the inside of the rear arches to make sure that the rust wouldnt come back.

I have sourced parts to make it original again such as the rear lights and boot strip and the turbine wheels.

I have sorted out the usual idle problems which the clios get. Which meant the ISCV has been cleaned, the CTS and Thermostat have been replaced.
I have also given it a coolant flush and new coolant.

The most recent job which i have done to the car is replacing the Subframe.
The one which was on there had alot of surface rust, so it was easier to buy a new one and use that.
So i have put another subframe on which has been painted black. and put on new wishbones, balljoints, and track rod ends. As well as a painted ARB with new rubbers.
I also put 2 new wheel bearings into the hubs at the same time.
I also sorted out some rust which was above the cat area, as it never had any underseal there from factory.

I have also put on some 172 Springs which had done 10k from new and good condition rubbers and new bearings.

On the braking side i put on some good condition front calipers wihch have been greased up and have Pagid Fast Road Pads, with Goodridge hoses at the front (I have the rears just havn't put them on) They stop well, Naples can agree :wink:
On the back it has new discs bearings and pads.

It also has had 4 new Toyo Proxes T1-R's in 185/55/15 fitment to keep the original feel.

The Interior is in good condition. with only a few small holes which are not very noticable.

It has a few mods which dont make it 100% standard.
It has a cat back blueflame system. and decat. as well as a custom airfeed going from the fog lights.
It also has a powdercoated rocker cover.
Alpine Type-S Coaxials 5.25" in the doors.

The car has covered 85k and has Fsh

I would like £1400 as the tyres on the wheels are new.

arj256
08-05-2006, 13:13
Pics:

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Cool%20Front%20On%20(1).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Cool%20Wide%20Arch%20Shot%20(4).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Fancy%20Arch%20Shot%20(5).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Nice%20Side%20Angular%20(2).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Nice%20Sun%20Shot%20(6).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Subframe.jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Under%20The%20Car.jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Rear%20End%20Showing%20Exhaust%20(9).jpg

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Latest%20Shots%2020.01.06/Side%20On%20Showing%20Standard%20Sus%20Height%20(7 ).jpg

Rott
08-05-2006, 13:24
Looks very clean, credit to ya mate 8)

Lunner
08-05-2006, 15:34
Also had another steerng column fitted from infinicar just before he brought it

Justin..
08-05-2006, 23:23
On the braking side i put on some good condition front calipers wihch have been greased up and have Pagid Fast Road Pads, with Goodridge hoses at the front (I have the rears just havn't put them on) They stop well, Naples can agree :wink: .

too right. whiplash i should claim on you :lol:

beatjunkie
09-05-2006, 00:20
ooh looks like a very nice example, where abouts are you located?whats the mot and tax currently on it too???cheers
Ryan

Zollo
09-05-2006, 10:16
Very good buy at that price 8)

Swervin_Mervin
11-05-2006, 10:52
Hmmmm.......

Coops
11-05-2006, 13:49
8) good luck with the sale mate!

oh n that undercar shot.........copper grease frenzy!! :lol:

Swervin_Mervin
11-05-2006, 16:19
Arj, you bringing this to FCS?

Zollo
12-05-2006, 17:38
Arj, you bringing this to FCS?

Depends if his Willy goes through the MOT this time! If it does, it's staying at home. What you got planned Mike?! :?

arj256
12-05-2006, 18:13
8) good luck with the sale mate!

oh n that undercar shot.........copper grease frenzy!! :lol:

Lol yeah, after having the joys of seized bolts. every bolt had some and put it on the heads to stop the heads rusting up.


Arj, you bringing this to FCS?

No im afraid not.

Swervin_Mervin
16-05-2006, 10:48
Arj, you bringing this to FCS?

Depends if his Willy goes through the MOT this time! If it does, it's staying at home. What you got planned Mike?! :?

Nowt. Straight buy was on my mind. Being an earlier valver it would be better suited to my plan to fit C575 bits. :twisted:

But I think it's out of the question TBH.