View Full Version : wheels
dannyb1986
10-04-2006, 11:44
ive got a chance to buy some wheels, off of a 106 gti, would they fit straight on the 16v? they were fited with spacers on the 106, so will i ned the spacers?
The PCD is different (stud pattern)
And the offset is way to low as well
PCD 4x100
ET 36 ish ...(give or take abit each way)
dannyb1986
11-04-2006, 08:02
i dont know if there universal fit, they have the 8 tud holes instead of 4, and what will matter if the offset is different? will they just not go on
they will more than likely be a 38 offset and have been fitted to the 106 with spacers cos they were needed
find out the offset and what PCD the other set of holes are
what wheels are they ?
dannyb1986
11-04-2006, 17:55
they are OZ titans
Nice choice 8)
www.lunner.co.uk/rsi
dannyb1986
11-04-2006, 18:38
that link doesnt work, have you got titans aswell? £80 with 2 brand new toyo proxes!
http://www.lunner.co.uk/RSi/index.html
Did have, sold them with the car, was sick and tired of them
dannyb1986
12-04-2006, 08:00
the offset is ET37, is that good or bad?
dannyb1986
12-04-2006, 23:26
any help guys, the stud pattern matches up and there offset ET37, is this ok or will they not go on?
any help guys, the stud pattern matches up and there offset ET37, is this ok or will they not go on?
They'll fit then.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.