Hi everyone I have just had the Williams jacked up on the ns for 3 days while I re welded the triangular section under the passenger footwell, I also patched the exhaust joint with EAP as it was blowing a little. So I go to start the car all lights come on fuel pump primes but nothing from the starter motor, and when I turn the ignition off i get a fast relay clicking from the fuse box and the indicators on the dash flicker a little, and also now when I go to lock the car( Clifford alarm, not sure make as I lost the cert) it locks then sets the alarm off! Prior to jacking the car up everything worked fine. Help much appreciated