Has anyone on here converted their power steering rack to manual
by blanking/by-passing connections on the p/s rack off ?
Which connections need blanking etc ?
Has anyone on here converted their power steering rack to manual
by blanking/by-passing connections on the p/s rack off ?
Which connections need blanking etc ?
Blanking off won't work as your hydro-locking the steering rack in that case.
Why don't put a manual steering rack on?
you have to loop the connections, not blank them
foxy did it, as di whitely i believe amongst others
Why go to the hassle? What's the benefit?
Power steering sucks massive donkey balls that's why Well it does in a mk1 clio :P
any ideas whats to loop into what mate ?Originally Posted by Coops
Do you know if they had any problems with it ?
Because p/s is for pussies :DOriginally Posted by Jamie.
No , seriously its taking too much precious space ...
I have run a line between the 2 ports on the steering rack and have filled the rack up with power steering fluid. I have blocked up all the ports on the pinion. Haven't had any problems so far but it's only had limited use.
Smaller por fittings were welded up.
Hope this helps.
ai thats how the other did theirs too iirc
think foxy ran his for year or two before it started to suffer a bit, bad feel etc