Ill keep an eye out mat.
Theres one on ebay at the moment but its £95 (o/s though). Too expensive.
Ill take this shaft into an engineers this week and see what he says.
Ill keep an eye out mat.
Theres one on ebay at the moment but its £95 (o/s though). Too expensive.
Ill take this shaft into an engineers this week and see what he says.
There is a circlip in there that needs spread apart as said and then they should seperate. Sometimes require a few chaps with the hammer as they can become seized :/
gav.
Would be really helpful if someone could show pics if they have them of the circlip?
Remember this is a 172 driveshaft.
I will show my arse in HMV shop window on preston highstreet all weekend if someone can prove to me theres a circlip in there.
I must be going blind if there is.
For future reference. Although in this pic you can see the clip, I still have not got the joint off even with hammering it, but I will get it eventually.
I had a similar problem with a mk1 shaft, no clip whatsoever, got busy with a grinder in the end
Oooooohhhhh! Might just buy 1 of those