Various Parts....

[_PAUL_]

Right as my breaking thread was getting rather long/didnt have pictures/some parts were sold ive decided to make a new one with pictures and an updated list.

Sparco 3 point harness in black £30


Phase 2 center cap(Metal) £10


Phase 1 rear lights with bulb holders and bulbs £10 each


Headlights with indicators in very good condition(Valeo) £25 each


Phase 1 wing mirrors 449(Electric) £15 each PASSENGER SIDE: SOLD



Phase 1 steering wheel £20 SOLD


Green induction kit with adaptor £40 SOLD


Headlight strips £10 pair


Drivers side 449 front wing £20


Front arch liners £20 pair


Heater dials £5


Dizzy cap £7


Passenger side PH2 rear quarter rub strip £8


Indicator/wiper stalks £5 each


Orange side repeaters £4 each


Coil pack £10


Various badges and switches £2 each FRONT WING BADGES SOLD, HAZARD SWITCH SOLD



PH1 ECU with clio coupe chip £50


PH1 engine loom £45




PH1 dash clock £5


Radiator £5


Fan £10


Starter motor heatshield £5


Alternator £35


Strut brace £20


Manifold heatshield £30


More pictures available if needed.
Will update list as and when more parts are taken off the car or parts are sold.

If theres anything you need i havent listed let me know as i may have it

[Tigeryang]

ill take an electric window switch, must be driver side one that controls the pass window and working light?

cheers

[_PAUL_]

Haven't a clue if the light works mate and i can't test as there's no wiring in the shell anymore.

[JoãoCosta]

the wiring loom have the "socket" for the lambda sensor? if yes, are you interested in sending this to portugal?

Regards

[_PAUL_]

Yes has the socket for the lambda sensor mate
PM me your address and i will find out how much postage will be

[talkingfish]

is the loom from a valver or a Williams? if it's for a valver will it fit a Williams?

[_PAUL_]

It's from a phase 1 valver one.
Not sure if it will fit a Williams someone on here should know.

[_PAUL_]

BUMP

Need these parts gone so i can scrap the shell.