black valver turbo one turbines near Leighton Buzzard

[Flan]

I was towing my 172 Cup as you dumped the turbo next to me...

so who was it...

[_ol_]

Weren't me, but are you down that way?

I live just down the road in Berko.

[Flan]

yer im in LB.

i wonder who it was then..lol

[Allan]

not me, but you know mines yellow ;)

Still running lovely btw mate :D

[Matt_16v]

certain I have seen this around my way too (buckingham)

[louie]

hi all. i am the owner of the valver. Its an absolute beast. Ive also got a williams clio. Just kitted the valver out with sparco buckets, willans 4 point harnesses, new t28 roller bearing garrett, and k-tec big brake kit.

[Flan]

Alan. I told u it was a good engine ;)

Louie. Whats the spec, did you do it urself or is it a bb kit.

[louie]

bought it already turbo'd, but it was a mess and done all wrong. so i took the engine out of it and rebuilt it and redid everything and i mean everything.
Spec-

Brand new Garrett t28r60 roller bearing turbo running at 8 psi of boost.
Manual boost controller
New renault 21 turbo MAP sensor and injecdtors and fuel rail.
home made intercooler pipe work
intercooler from iveco, soon to be changed
turbo oil feed and drain lines from k-tec
9.1.1 dished pistons, with standard rods
Total seal piston rings
Fully honed bores
Spresso head gasket with turbo head bolts
new oil pump and piston spray jets
New cambelt, tensioners and water pump
All new bottom end gaskets seals and bearings.
New valves, and stem seals and valve seats
new rocker cover gasket
Custom exhaust manifold and downpipe
Decat, with magnex exhaust
scuttle induction for turbo
Paddle clutch
clio 172 soft clutch pedal conversion
newly remapped r-tuner turbo chip, (soon to be getting an omex ecu)
Lowered about 50 mm on new dampers and springs.
yoko prada tyres.
K-tec big brake kit
Fully stripped interior, and i mean fully lol.
Sparco buckets
Willans 4 point harnesses
custom bar in rear to mount eye bolts
low temp thermostat.

Phew thats about it.
Ive basically done the best i can to really sort the engine out on a budget, whilst still running a low bost. only 8 psi.
This ensures reliability, and is plenty fast for me. 201 bhp, 187 ib/ft torque, and it weighs 892 kilos. So its an animal basically.

Where abouts in leighton you live, cos ive never seen ure car?

[cliokiz]

I want that black Ph1 turbo!

[MAXIBOY]

Spresso head gasket with turbo head bolts

what head bolts are you running mate..some thing special..