Willy 3 Decal

[Wobba]

side arch WILLIAMS decal = 166mm wide x 36mm high

This is correct for the original Willy1 as well. I measured it more like 35mm high though.

[simonr85]

My williams 1 decals should be ready this weekend too, i scanned in the 1s i bought from Yanoo as they were nearly identical, the size are correct as stated on this thread, the only difference was on the letter S that coops noticed and the points on the W were a little different, i have then used photoshop to trace the scanned image and fix the little bits that were wrong and will be taking it on disc to my local stickershop this weekend where they can match the gold to the originals on my car (hopefully)

[FATBOY]

excellent simon! would be good to see what these look like also!

[Yanoo_]

These stickers were sent to Simon:

side arch decal:



rear tailgate decal:



These stickers were made by a local company, the length and height were measured on my car. Unfortunately the guy could not make infilled decals, only the outline.
Simon: what's wrong with the letter 'W'? As I wrote formerly I think they are good copies with good letters but without infill.

[simonr85]

Simon: what's wrong with the letter 'W'? As I wrote formerly I think they are good copies with good letters but without infill.

If you look at the ones on my car on this pic the points on the inside of the W are sharper than the 1s i got off you, i didnt even notice myself until i started redrawing the decals to do the S, im not complaining tho mate, they were well worth the money as they are probably the best 1s anyone has made so far and hopefully they will enable me to get perfect copys made up

[FATBOY]

darkfibre, are you jermaine??

[darkfibre]

[darkfibre]

right i have e mailed them regarding the sizes which are as follows

original

rear tailgate WILLIAMS decal = 150mm wide x 32mm high x 1
side arch WILLIAMS decal = 166mm wide x 36mm high x 2
side number 3 = 21mm wide x 36mm high x 2
rear number 3 = 20mm wide x 33mm high x1

there sticker sizes are as follows


rear tailgate WILLIAMS decal = 131 1/2 mm wide x 27 1/2 mm high x 1
side arch WILLIAMS decal = 144 1/2 mm wide x 30mm high x 2
side number 3 = 30mm wide x 22 1/2 mm high x 2
rear number 3 = 20mm wide x 22mm high x1

and i have asked them if they can make them up to proper size. as the colours are quiet a close match....

FATBOY,

Are the bits in bold correct? My rear tailgate measures:

166mm wide x 36mm high (which is your side arch)

I don't have measurements for the sides.

Weren't the side arches' decals smaller than the tailgate??

If it is, then the incorrect quantities were requested above?

[darkfibre]

Forgot to add, my rear 3 is:

21mm wide x 36mm high (which is also your side measurements...)

[Purple]

Here's a big jpeg copy of the Williams logo that I made from a PDF file someone else created (Sorry, I can't remember who did that).

Feel free to use it to help make the decals.
http://i60.photobucket.com/albums/h1...Williams-1.jpg