not sure if renault still sell them tbh, dont know the part number anyway like, most ppl get them off ppl who own cups etcOriginally Posted by 16v_paddy
not sure if renault still sell them tbh, dont know the part number anyway like, most ppl get them off ppl who own cups etcOriginally Posted by 16v_paddy
I got my rears from someone one here, can't remember who though
So your running similar set up to me then. You can just raise the ride hight and try it im sure it will be OK unless its really rough. The dampers are what really make suspension work.Originally Posted by richy
The cup decarbons are now obsolete so you can not buy them, they are very good as they are mono tube so a lot stronger than you std twin tube stuff like Koni,Spax,Avo,leda,Gaz stuff. Decarbons are basically competition bilsteins.
If still too stiff then get some 250 lbs spring and try them, they are only 50 quid.
i will try the 350lb set then, already have 250lb set in the garage so can easy swap!!Originally Posted by Evogone
i made my own sump gaurd from 5mm alloy sheet, shaped it, and welded fixing points to my subframe. its not on the car yet!
id defo not pay for one when a sheet of alloy costs next to nothing. :D
ive managed to get hold of some alloy sheeting but need to have a look if there big enough yet!
any news on the bilstein monotube (motorsport version)??Originally Posted by Evogone
im going to be looking to change the suspension sometime soon, ive been looking and ive managed to find the bilstein motorsport rear dampers(monotube) for the williams/16v, not sure on damping rates compared to the B6 sport or B8 sprint dampers, i know these use the bearing end fitments not the normal bushes.
i noticed the H&R coilovers use bilstein monotube dampers which i was told there the B8 sprint version, although not seen any to say if B8 or B6, i have thought about using these but obviously they wouldnt be a good as proper bilstein motorsport monotubes.
also after seeing a rally car clio ive seen a good way to sheild the tank!
it would be so easy to make your own sump guard... and cheap... would cost next to nothing.
yeah im gonna make both sump and tank gaurds up myself.