Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37
  1. #31
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    abuut 9v i think. have you tried easy start. if you spray a little of this in and it fires you have a fuel problem. if it does not a spark problem. then we can go from there.

  2. #32
    Forum User Andyvalver's Avatar
    Join Date
    Mar 2005
    Location
    Naples Beast Derby
    Posts
    3,631
    Are all the earths connected? My car wouldnt start for 2 days when i had a dodgy earth lol, then it did and ran for a week then stopped again lol

    ****in thing Fine now ive sorted it though.

    Sounds stupid i know but i replaced ecu's coils and al sorts and it was just a loose earth

  3. #33
    Forum User
    Join Date
    Dec 2005
    Location
    Glasgow
    Posts
    712
    shouldn't go below 10V when cranking.

    earths are that common everyone knows abotu them including my gran

  4. #34
    the earth strap is earthed under the wheelarch and i cleaned the connection yesterday with some wet n dry. Will try this again but would the starter crank if earth was dodgy and would i get a spark? should i be using the earth wire from the gearbox or block itself?
    ta
    josh :P

  5. #35
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    gearbox earth earths the engine

  6. #36
    Shes alive when the new engine was fitted some numpty put the fuel pipes on the wrong way round.
    ta
    josh

  7. #37
    Forum User Andyvalver's Avatar
    Join Date
    Mar 2005
    Location
    Naples Beast Derby
    Posts
    3,631
    Quote Originally Posted by joshydee
    Shes alive when the new engine was fitted some numpty put the fuel pipes on the wrong way round.
    ta
    josh


 

Similar Threads

  1. Paddy's dead valver lives again
    By 16v_paddy in forum Pictures
    Replies: 20
    Last Post: 21-01-2009, 03:37
  2. Paddy's dead valver will live again
    By 16v_paddy in forum WilliamsClio Discussion
    Replies: 9
    Last Post: 13-11-2008, 02:33
  3. re introduction
    By speed in forum Newbie Section
    Replies: 0
    Last Post: 12-03-2008, 21:11
  4. night.icon's valver = dead!
    By white16valver in forum WilliamsClio Discussion
    Replies: 10
    Last Post: 31-08-2007, 21:37
  5. Dead Naples Valver.
    By Loz in forum Pictures
    Replies: 24
    Last Post: 12-02-2006, 21:08

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •