Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34
  1. #1
    Forum User Gav's Avatar
    Join Date
    Jul 2005
    Location
    clio16valver.co.uk - Mk1 Clio 16v Dedicated Club
    Posts
    5,542

    fully restored naples valver - loads spent

    GET THIS ****IN CAR AWAY FROM ME!

    I have lost all passion for it and i just cant stand looking at it now

    This is a M reg 1995 Clio 16v in Naples Red.
    This has recently been FULLY restored meaning new:

    wishbones
    cv joints
    hubs
    wheel bearings
    magnex exhaust
    all new engine mounts
    gearbox mounts
    brakes [disc and pads] front n back
    suspension [springs n dampers] front n back
    drive shaft
    all new gaitors for everything
    new callipers front n back
    engine is brand brand new, it was taken out of a 66k N reg clio due to a rear shunt write off, this was then taken into Nick Hill @ Hill power and everything replaced [dont ask me why] new valves, pistons, gaskets, new inlet, everything which then imo brings this engine back to 000000. Gearbox has only done 58k also

    Full leather interior which is mint and has been looked after, colour coded engine bay, no rust on the body at all inc arches and paint work is mint. 15" wolfrace voodoo's [look like 17's but i assure you they are 15's] there practically brand new

    bad points are:

    Tiny little dent in the very front passengerside of the bonnet on the lip, can barely see it unless pointed out, can fix this for about £50 or even cheaper from my dads business

    wheel bearings need replacing in the drivers side wheel [again my dads company will do this cheap, and wheel bearings are not expensive at all]
    and both front wheels need balancing, again cheap as chips

    may need a ISCV or just a clean, not sure, havent checked inside it

    if you spend about £100 on this car it will be 100% mint, but i hate it now and dont want to spend another penny on it as u can see i have already spent loads already!

    offers around 2k if possible but iam open to offers, this car is really really nice and due to the rebuild practically brand new

    engine has done 3k since rebuild [due to driving up to see the mrs in sunderland] but never got the car past 60 as i didnt want to risk it due to wheels need balancing, so there all easy miles.
    I have never ragged the car except when i went to santa pod, and even there it didnt fail to impress

    serious offers please
    would swap for another valver but cant be no shed [meaning, rusty arches etc]

    Cheers

    Gav


  2. #2
    Forum User Gav's Avatar
    Join Date
    Jul 2005
    Location
    clio16valver.co.uk - Mk1 Clio 16v Dedicated Club
    Posts
    5,542
    i may be fixing the wheel bearings this weekend, see how i feel, will get wheels balanced while im there if i do

  3. #3
    Founder FATBOY's Avatar
    Join Date
    Sep 2004
    Location
    CLACTON-ON-SEA,ESSEX
    Posts
    7,078
    quid???
    CLIO WILLIAMS 0215

  4. #4
    Forum User stew's Avatar
    Join Date
    Aug 2005
    Location
    Kirrie, Scotland Car : Hybrid Track Car
    Posts
    2,336
    ill do 2quid fatboy!

    any advances....... lol

  5. #5
    Forum User Zollo's Avatar
    Join Date
    Feb 2005
    Location
    Southampton
    Posts
    4,906

    Re: fully restored naples valver - loads spent

    Quote Originally Posted by Williams-Jr
    GET THIS F***IN CAR AWAY FROM ME!

    I have lost all passion for it and i just cant stand looking at it now
    And you say you're in sales?

    That's a new technique to me...

  6. #6
    Forum User Gav's Avatar
    Join Date
    Jul 2005
    Location
    clio16valver.co.uk - Mk1 Clio 16v Dedicated Club
    Posts
    5,542
    serious guys
    i want it gone....its a Daz0rz moment, just want the thing off my drive and something there to replace it

    £2.50?

  7. #7
    Forum User
    Join Date
    Aug 2005
    Location
    Southampton
    Posts
    7,292
    £3 ? can pay now?

  8. #8
    Forum User Gav's Avatar
    Join Date
    Jul 2005
    Location
    clio16valver.co.uk - Mk1 Clio 16v Dedicated Club
    Posts
    5,542

    Re: fully restored naples valver - loads spent

    Quote Originally Posted by Zollo
    Quote Originally Posted by Williams-Jr
    GET THIS F***IN CAR AWAY FROM ME!

    I have lost all passion for it and i just cant stand looking at it now
    And you say you're in sales?

    That's a new technique to me...
    i sell leasing, not clios...if it was clios i would quit

    there isnt anything wrong with the car except above mentioned, but one gets to the point where they have had enough
    ive spent too much money on it and it needs to go

  9. #9
    Forum User Zollo's Avatar
    Join Date
    Feb 2005
    Location
    Southampton
    Posts
    4,906
    I know mate, was just kidding

  10. #10
    Forum User Jamie.'s Avatar
    Join Date
    Mar 2005
    Location
    Scotland
    Posts
    4,620
    why sell urs for another valver? since u have had all the work done to urs it must be more reliable than another?


 

Similar Threads

  1. Clio 16v. Spares/repairs or can be restored, £600
    By Dan_Oliver in forum Cars for sale
    Replies: 3
    Last Post: 06-03-2010, 10:14
  2. Cheap valver loads of new bits spares/repair £500
    By BristolSam16v in forum Cars for sale
    Replies: 16
    Last Post: 05-11-2008, 21:17
  3. Loads of Valver Bits
    By Coops in forum Items for Sale
    Replies: 6
    Last Post: 09-08-2007, 10:29
  4. 1992 K Valver + Spare Naples Valver both for £300ono
    By FlamingMonkey in forum Cars for sale
    Replies: 40
    Last Post: 22-01-2007, 13:18
  5. ***Breaking** loads of Valver Bits!!!!!!!!
    By TA in forum Items for Sale
    Replies: 25
    Last Post: 11-05-2006, 02:32

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •