The triangle shaped air intake...
Thinking of fitting something to the valver bonnet to take air from the vent directly to the filter.
Not sure it will work but cant find anything to fit the vent on the bonnet.
The triangle shaped air intake...
Thinking of fitting something to the valver bonnet to take air from the vent directly to the filter.
Not sure it will work but cant find anything to fit the vent on the bonnet.
just get a hose going from the filter to the fog log holes in ur bumper
no, cos i dont have a 16v front bumper do i
also there is a cold air feed which goes into the normal box already down that way however being the vent on a 16v bonnet is useless on my car as it cools nothing down i might aswell make some use for it
fair enoughOriginally Posted by RSi Dave
i heard u were getting a 16v bumper thats all
maybe, not sure yet.
If i did the fogs would stay, hate cars with only 1 fog light
I strongly doubt if this would work on a std valver,
since it is designed for GrA Clios.
Why don't you go for HP induction ?
to costly and ive got an RSi...
Ive got something else planned anyway now
why do you need one of those if its an RSi......does the RSi have an oval shaped inlet aswell ?
the initial plan was to use the vent on the 16v bonnet as an air intake point, using a triangle shaped induction vent (as above) which would be connected to a pipe which would then go to the air filter, however after looking at sizes etc... i would imagine that a induction vent that big wouldnt fit because of either the inlet or the bulkhead. So plan is to somehow get a pipe running from the rain catcher to the air filter, not to sure what ill achieve and could look a mess however could also look pretty cool and unique
could you mod your bonnet with a R19 bonnet vent, and put in over the Induction filter.