Dull Laquer

Why would this happen?

[Lunner]

You need to rub it down with wet 2000 grit wet and dry to get a totally smooth finsih, and tehn polish with a sponge buffing wheeel on a sander etc witha cutting compound like G3, and then polish it, for the shine

wet n dry the laquer?

Its yet to be t-cutted and polished but its just dull looking

[Lunner]

wioll be dull looking, yeah weta nd dry it till its smooth as anything, just takes out any imperfections, use lots of water, i suggest a spray bottle and just keep spraying water on, gonna take alot of t-cut, its a very mild abrasive

ok, ill have a bash as soon as then...

need to get some metalic t-cut aswell

cheers lunner

[Lunner]

only reason metallic t-cut is different is becasue the ammonia in normal t-cut reacts with some types of laqure, the acrylic laqure for halfords should be fine with it

ah right, ive got loads of normal t-cut...