Bastard Cunt Bitches

[Gav]

hey dude sorry i didnt reply didnt follow the thread

if u want a quote on de-locking then see the WHITE STAR AUTO ENGINEERING thread in general chat all contact details are there

[Lunner]

been followed a couple of times, piss easy to loose the cunts tho, esp when you know the roads

Take it you didn't dish teh sides of the lock hole?

You will need to leave the filler ever so slightly pround, or you will see the outline of the lock hole, spent ages getting it right on my bonnet when i smoothed that

Nope, did that...

it wasnt completly flat as they screwed one side in, so just pushed the other sides in aswell... should looks really flush once sorted.

Coops, i dont know your road however know kingswood and cott road... I used to live in Cottingham, my parents live in willerby now.

[Lunner]

Looks liek you got a bit of orange peel there fella, nowt a bit fo wet and dry can't fix tho ;)

its metallic and its not been laquered yet...

Should i wet n dry before laquering metallics?

[Lunner]

If its got orange peal, sand it down flat with 2000 grit wet and dry and then do a quick mist over again before laquring, if there is orange peal under the laqure you'll never get rid of it, without respraying it

ill check in the morning... however that could be the camera... it pixelates things quite a lot

[Lunner]

if you are getting orange peal you are holdng teh can too far away/moving it too fast, the paint shoudl hit the surface, run together and then dry before it runs down, fine fine line

yeah... possibly, im hardly spraying in ideal conditions