Which sensors in the engine control the interior dials...
ie which sensor in the water system (there's one in the rad 2 ith the side of the head) controls the dash indicarot. if i found out which one ill just put the sensor into my engine to make that work (does that make sence)
i also need to no which one for oil Presure and oil temp..
Thank you all...
Results 1 to 9 of 9
Thread: engine sensors.. which one...
-
10-02-2006, 20:30 #1Forum User
- Join Date
- Aug 2005
- Posts
- 1,077
engine sensors.. which one...
-
10-02-2006, 20:43 #2Forum User
- Join Date
- Feb 2006
- Location
- Luton and Paris
- Posts
- 45
Re: engine sensors.. which one...
oil presure:
Originally Posted by FlansS14
Which sensors in the engine control the interior dials...
ie which sensor in the water system (there's one in the rad 2 ith the side of the head) controls the dash indicarot. if i found out which one ill just put the sensor into my engine to make that work (does that make sence )
i also need to no which one for oil Presure and oil temp..
Thank you all...
oil temp (it is the same sensor that indicate the level of oil, euh to know how much oil there is in the carter)
water for dash indication:
-
11-02-2006, 10:38 #3Forum User
- Join Date
- Aug 2005
- Posts
- 1,077
wow... thanks for that.... prety much sums it all up.
cheers
-
11-02-2006, 13:34 #4Forum User
- Join Date
- Feb 2006
- Location
- Luton and Paris
- Posts
- 45
your welcome! Originally Posted by FlansS14
wow... thanks for that.... prety much sums it all up.
cheers
Oil pressure sensor is between the mainfold and the head motor, and the temp oil is next to the oil filter but difficult to remove ;)
-
13-02-2006, 21:55 #5Forum User
- Join Date
- Aug 2005
- Posts
- 1,077
nice one mate... yer no where they are now... you got any ideas what color the wire is to the oil presure sensor... my looms missin one.. also do you no what part of the loom controls the rev counter. is it take of the coil somewhere or from the ecu....
thanks
-
14-02-2006, 02:27 #6Moderator
- Join Date
- Sep 2004
- Location
- Hinckley, Leics.
- Posts
- 7,816
Oil pressure wire is normally purple with a connecting plug (Black round) next to the flywheel sensor connecting plug (Grey oval).
Revs are taken from the pink wire of the white plug connecting to the coil.
Mat.
-
19-02-2006, 19:33 #7Forum User
- Join Date
- Aug 2005
- Posts
- 1,077
Cheers Matt....
glat i didn't cut that off...lol
-
19-02-2006, 21:24 #8Moderator
- Join Date
- Sep 2004
- Location
- Hinckley, Leics.
- Posts
- 7,816
Hehe,
How's it going?
Mat.
-
22-02-2006, 19:35 #9Forum User
- Join Date
- Aug 2005
- Posts
- 1,077
All good... Just got my new Emerald ECU...
had to wait for my remote oil filter kit to come (there's no foom for it as its on the front of the engine, it just fouls the rad)
But not far to go now.....
FCS will be its relise....
Reply With QuoteSimilar Threads
-
ABS sensors
By Matty86 in forum WantedReplies: 0Last Post: 29-06-2007, 23:12 -
What Sensors are these?
By donsrno1 in forum WilliamsClio DiscussionReplies: 27Last Post: 11-04-2006, 19:24 -
ABS Sensors... :0
By BigBoreBri in forum MechanicalReplies: 5Last Post: 27-11-2005, 23:53 -
What temp sensors are on a valver engine ?
By BRUN in forum MechanicalReplies: 5Last Post: 19-06-2005, 00:22
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts