0-60 less than 6 seconds

[david932]

any 1 know where theres a site where u can upload videos of mobiles, i got my was standard williams, bar a scorpion exhaust doin quite a quick 0-60 time. idea for any1 who hasn't tried it yet. get ur mate to video on their mobile ur 0-60 run. on most phones the video has a timer, not accurate but you can get a good estimation. cheaper and more readily available than drag strips!

[2 live]

id be very surprised if u got a std willy that low tbh mate...... they all need a change to 3rd to hit 60......unless they chipped...which adds time, hence the close 0-60s of the valver n willy, valver will hit 60 in 2nd.



think mine was v high 5s low 6s...when it was cammed, mapped etc. just to give u something to compare to..was 6.7 with cams n no chip.7.01 std.

[Chris n`nic]

Yeah as Jon says...v low 7`s probably about right

Chris

[Lunner]

On teh speedo true 60mph is arounf 66/67mph on the clock

[Clio_GTT]

think of it this way, nick read only got a 5.5 with his big spec turbo setup, no chance of touching it with a willy. 5.5 is the paper figure for a nissan pulsar GTiR

[Chris n`nic]

Not sure about that m8...There will be a nice balance of power and grip etc....you could have 400 bhp but it wouldn`t mean you`d get 3 second 0-60 in a FWD. I managed a 5.8 in my Cup which wasn`t 100% and only had rear seats out so I would say a super stripped cam`d willie must be able to get close..of course the driver has lots to do with it

Chris

[Clio_GTT]

maybe as you say a stripped to the hilt willy with a lot of engine mods and a good driver "may" come close.

[FlamingMonkey]

Mine did a 6.8 to 0-60 with just an exhaust

I reckon it will be lower now, will be good to test it again at York this year

[J o n]

On teh speedo true 60mph is arounf 66/67mph on the clock

Willy's more accurate than that... no wonder you think your car will beat valvers

[harry67]

mines done 6.4 to 60 before and it was completly standard.