RSi Tuning

Currently got:

Green Cotton Induction Kit
Full Magnex Exhaust
Decat

What other things can i do to increase performance?

I would like the rev limit increased as 6k is boring...

[BRUN]

Lunner's the RSi man, im sure he can help you with this

thanks

[Lunner]

Rev limit on an RSi is around 6500rpm, no point in an increesed limit as peak power on mine is at 6k.

Headwork, cam, all relaicly cheap compared to the 16v as there is half of everything.

£300-£400 for headwork(ish), and iirc £300ish for and vernier pully

Can get good gains by modding the exhaust manifold

Stripping ti will see noticable gains for no money

Yeah it was loads quicker stripped,

so a decent 4-2-1 Manifold would be good...

improvements to the inlet?

What about NOS?

[Lunner]

No, clean teh welds up on teh std one, iirc 4-1 is better than a 4-2-1.

No where does RSi manifolds so unless you want a custom job, a replacement is outa the question

hmm, clean as in reweld?

have you ever 1/4 miled your RSi lunner?

i need a comparison

[Lunner]

Take the manifold off and look blocvk end inside at the welds, they are really shitty, just grind them down abit, but not too much.

i ran 16.3 first time i ever did it, previous owner ran 15.8 full fat and with cat on

fook, got some improvment to do then

[Lunner]

http://www.lunner.co.uk/williamsclio/CIMG1381.JPP

Can see teh welds here....yes i know photo is only half uploaded, uploaded is playing up