Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Forum User
    Join Date
    Jan 2006
    Location
    Devon
    Posts
    242

    Oil filter, oil temp and oil pressure questions...

    Hi.

    Seeing as the oil is essentialy the heart of the engine I'm slightly worried about my Valver. The engine is a 65k lump fitted by "5 Alive"

    Anyway, the oil temp gauge doesn't work, but the oil pressure does.

    At about 3k rpm, the oil pressure as around the 3bar mark and it sits at about 1Bar on idle but slolwy drops after a few minutes but a blip on the throttle will see it rise up again..

    I only really use the car for short journeys (10-15 minutes) and the oil is starting to look a bit scummy (going black and smells of petrol a bit)

    I don't know if this is nomral though. 'On song' the pressure seems fine and goes way above 3bar.

    Also how hard is it to fix the Oil temp gauge? As I'd really like this too work.

    I also have some 10-40w Comma lite to go in, but can't get the oil filter off. Can get my hands around it but it won't turn (don't have much room for movement though). Isn't there a good tool I can buy as I dont want to jam a screw driver through ti.

    So, can you peeps shed some light on my problems please?

    Cheers

  2. #2
    Forum User
    Join Date
    Mar 2005
    Location
    North Wales
    Posts
    131
    Those kinda figures sound normal.

    Does it hit around 6Bar on cold start up?

  3. #3
    Forum User
    Join Date
    Jan 2006
    Location
    Devon
    Posts
    242
    Cool.

    At idle on cold start it sits just below 2bar.

    That's on 1.2k idle.

    Cheers.

  4. #4
    Forum User
    Join Date
    Mar 2005
    Location
    North Wales
    Posts
    131
    just below 2bar on idle when cold!

    that ain't right mate....should be between 5-6bar!

  5. #5
    Forum User Coops's Avatar
    Join Date
    Aug 2005
    Location
    Turbo'd Beastie
    Posts
    9,955
    my oil temp n level is playin up mate, put brand new sender in (its both in one sensor) and temp worked fine but still no level, n now both are fooked! after 3 days!!doh!!

  6. #6
    Forum User
    Join Date
    Jan 2006
    Location
    Devon
    Posts
    242
    So what does that mean?

    If it's that low?

  7. #7
    Forum User Purple's Avatar
    Join Date
    Nov 2004
    Location
    103.94E/1.31N
    Posts
    2,066

    Re: Oil filter, oil temp and oil pressure questions...

    At about 3k rpm, the oil pressure as around the 3bar mark and it sits at about 1Bar on idle but slolwy drops after a few minutes but a blip on the throttle will see it rise up again. I only really use the car for short journeys (10-15 minutes)
    Looks about right, especially if you only use it for 15mins each time; the engine can't warm up properly.

  8. #8
    Forum User
    Join Date
    Jan 2006
    Location
    Devon
    Posts
    242
    Cheers mate.

    But what about the cold start idle pressure?

    Btw the car has oil (obviously) but it's about half way between max and Min. Also I had to top it up when i bought it with some spare oil I had, so I don't know if they were different grades etc and maybe causing a problem?

    I have been meaning to put the COmma in but like I say, can't get the filter off.

    Cheers.

  9. #9
    try some oil filter pliers, thats what my mechanic uses to get mine off, the other types are near impossible to use on these cars

    from a cold start your oil pressure is only 2bar ?......are you sure ?......a proper cold start, left overnight ?

  10. #10
    I'm pretty sure your cold idle pressure shouldn't be about 5-6bar either.

    I'll check mine tomorrow as it's been sat since saturday arvo and it's got a thick frost layer on it.


 

Similar Threads

  1. Location of oil pressure & temp senders?
    By alex_e3 in forum Mechanical
    Replies: 10
    Last Post: 22-04-2007, 02:08
  2. Oil Temp & Pressure dials
    By CharlieG60 in forum Mechanical
    Replies: 2
    Last Post: 28-11-2006, 18:27
  3. oil temp and pressure
    By lankyboy in forum Mechanical
    Replies: 3
    Last Post: 20-03-2006, 17:34
  4. oil temp/pressure on willy at constant 70.....
    By Jamie. in forum WilliamsClio Discussion
    Replies: 13
    Last Post: 14-12-2005, 09:06
  5. Oil Gauage TEMP and PRESSURE
    By Myers16v in forum Mechanical
    Replies: 2
    Last Post: 10-08-2005, 23:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •