help me with my valver , Calling 2live, Winston, Gunner etc.

**JonnyK** · 17-11-2005, 15:16

Hello Guys, Just about to pick up my new valver and it has a problem or two...

It doesnt accelerate like it should and it tops out at 90mph. The owner tells me it should be the head gasket needing replacing?

any ideas? nothing too expensive i hope, i just want it to run decent for a month or two till i transfer my hybrid engine into it!

john

**smokey** · 17-11-2005, 15:21

iirc headgasket change is about £400ish

**JonnyK** · 17-11-2005, 15:23

bugger !

**Craig** · 17-11-2005, 15:54

u should be able to get it done for half that at a decent small garage mate. had one done on an old clio and it wasnt much more than £200

**northy** · 17-11-2005, 16:05

check the throttle is opening fully !

**Mattie** · 17-11-2005, 16:17

has it been standing a long time mate?

i remember wen i pickd my willy up it topd out at around 75

then i had it serviced ( changed plugs etc ) n it was much betta! :D

**JonnyK** · 17-11-2005, 16:33

hmm, might try a full service plus head gasket change then!

**neilc** · 17-11-2005, 16:43

sounds like the trouble I am having with mine at the moment

http://www.williamsclio.co.uk/forum/...pic.php?t=7288

**Martin** · 17-11-2005, 19:06

mine topped out at a similar speed when it was running on 3 cylinders...(water in the plug holes)

**neilc** · 17-11-2005, 19:53

thats my worry that I have lost compression in one of the cylinders.

Will find out for sure tomorrow when it goes into Renault

Thread: help me with my valver , Calling 2live, Winston, Gunner etc.

Thread Tools

Search Thread

Display

help me with my valver , Calling 2live, Winston, Gunner etc.

Similar Threads

Valver ECU with Gunner Chip

Where's gunner, 2live, martin etc ...

Engine swap HELP FAO GUNNER, WINSTON ETC>>

2live,gunner,winston etc....

The N/W dream team (2live, Winston, Gibbo)

Posting Permissions