does that circled torx screw need to come out? if so how the hell do i get into it without the engine mount bracket thing stopping it?
thanks
Tony
does that circled torx screw need to come out? if so how the hell do i get into it without the engine mount bracket thing stopping it?
thanks
Tony
Support the engine on a jacked up bit of wood and remove engine mounting.
as above mate , there 2 on them bolts in the middle and 1 on the left and iirc 1 or 2 on the right
righty ho, i thought this was the precedure, just double checkin
thanks alot
As above and as i posted on CS
If you just want to see if it has gone then why not just remove your offside wheel, and take off the lower plastic cover (it cover the crankshaft and aux belt pulley)
Save the hassle of undoing the engine mounting and supporting on trolley jack.
Or just take the rocker cover off and look in from the side.
Mat.
u mean the bigger one that covers the spark leads etc? can u see from there?
Yeah, if you remove the F16ie cover, then the leads and the plastic bit they sit in you will have 16 screws holding the rocker cover on, take that off and you can see the cambelt.
If the cambelt has just lost some teeth and not snapped you won't be able to tell tho as the gap would be around the crank pulley at the bottom.
Mat.