Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Forum User
    Join Date
    Sep 2005
    Location
    Stansted, Essex
    Posts
    305

    Cross member radiator sits on part no required - Clio 16v

    Yet another thing needed.

    Have noticed that the cross member that the radiator sits on is very badly corroded beyond repair.

    Does anybody know the Renault part no?

    Had a look on Dialogys and couldn't see it.

    Thanks

  2. #2
    Forum User
    Join Date
    Sep 2005
    Location
    Stansted, Essex
    Posts
    305
    Just found out that this is part of the subframe and can't be bought seperately. Replacement subframe is 240 odd quid from Renault!!!!

    Beever Auto Panels do a pattern part for 85 quid.

  3. #3
    cut and weld on a new section

  4. #4
    Quote Originally Posted by James Clio 16v
    Just found out that this is part of the subframe and can't be bought seperately. Replacement subframe is 240 odd quid from Renault!!!!

    Beever Auto Panels do a pattern part for 85 quid.
    Look around, I got a second hand one for 60 punds in good nick, I have seen cheaper.

  5. #5
    Forum User 2 live's Avatar
    Join Date
    Sep 2004
    Location
    out there somewhere
    Posts
    7,399
    as ben says cut it and weld a new piece in.could even drop the rad a few inches ready to give clearance for bodies .hehe

  6. #6
    Forum User
    Join Date
    Sep 2005
    Location
    Stansted, Essex
    Posts
    305
    I'm hoping the rest of it isn't as bad, but I'll have a good look when I take the engine out and take it from there.

    Throttle bodies would be nice...

  7. #7
    Quote Originally Posted by 2 live
    as ben says cut it and weld a new piece in.could even drop the rad a few inches ready to give clearance for bodies .hehe
    only problem then is that it touches everything if you go over humps lol.

    We looked at that option alot lol.

  8. #8
    Forum User 2 live's Avatar
    Join Date
    Sep 2004
    Location
    out there somewhere
    Posts
    7,399
    hmm......works fine on geds.and he has an oil cooler down there too..no damage yet

  9. #9
    lol, we were looking to drop it about 4-5" though.

  10. #10
    Forum User 2 live's Avatar
    Join Date
    Sep 2004
    Location
    out there somewhere
    Posts
    7,399
    was gunna say...spose it depends how far ur droppin it lol


 

Similar Threads

  1. Help please, Part number required
    By pat_986 in forum WilliamsClio Discussion
    Replies: 4
    Last Post: 22-12-2006, 22:49
  2. Part no. required
    By Tommo in forum WilliamsClio Discussion
    Replies: 7
    Last Post: 26-10-2006, 11:53
  3. Part no's required please
    By big hp in forum WilliamsClio Discussion
    Replies: 5
    Last Post: 19-04-2006, 19:53
  4. Part numbers required please
    By Daz. in forum Mechanical
    Replies: 3
    Last Post: 07-12-2005, 22:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •