Oil pump input shaft oil seal

[PhilW]

I may be being lame here but I cannot find a part number or availability of the above seal. My description may be incorreect so have posted an image below of the seal that I am looking for.
My short engine is now ready to be rebuilt and the above seal is the only one that I am short of, can anyone offer any guidance please?

The seal that I'm after is the upper one in the image below;
[/URL]

Thanks

[Vandella]

http://www.catcar.info/renault/?lang...Q9PTEwSg%3D%3D

Crossers kindly posted this.. otherwise do you have dialogys?

[PhilW]

Yea, thanks for this, I do have this link however I still cannot see what I am looking for.
I also have a copy of diologies but its a huge programme and my son wasnt keen on loading it on his pc, since I only have an iPad I'm stuck on that one.

[katbloke]

mine came with my engine build gasket sets

but it looks like it might be 7701466408 gasket set

[16v_paddy]

Usually comes in a bottom end gasket set like these

http://www.ebay.co.uk/itm/BOTTOM-END...y_NJqULdkyWlYg

Bottom left corner of the pic

[katbloke]

[PhilW]

Thanks for the responses guys.p 👍
looks like this seal must have gone missing at the engine shop, I have all the other gaskets and seals, I'll have to see what I can do

[Crossers]

Looking on Diologies, it is only available as part of a set as posted by Katbloke (7700830971) and Paddy.

The set may still be available from Renault, but i'd recon it'd be the best part of £80-90. You may as well just get the set that Paddy has linked.

Oddly, the crank seals can be purchased separately from the kit.

Paul.

[PhilW]

Hi Paul,
Thanks for the reply. It looks like I have solved my problem.
Yesterday I was going through all the engine parts that I need to fit to the engine, so that I could decide the correct sequence to do it in and in the box that contained the new oil pump was an oil seal.
I held this up to the engine and it looks to be the one. I think that someone at the engine shop must have logically dropped the seal into the oil pump box so they could fit it with the new oil pump and then forgot that they had put it there.
Thanks again to Paddy & Graham for getting involved too 👍

[katbloke]

Dont forget my bolt check bud and please keep posting pics of your build in a place I can see them :D