I'm just trying to remove this from my car and before I force anything that I shouldnt, I though that I would check with the knowledgable people on this forum.
i have disconnected all the fuel lines, breather hoses etc, then removed the two nuts holding the fuel injection rail in place and as far as I can see there is othing else to remove. The fuel rail is now slightly loose on the mounting studs but it wont pull out using reasonable pressure.
Is there anything that I have missed out?
Anyone had a similar experience who can advise me on what to do next?
The younger me at this stage would have carried on trying to remove the rail and either got it off or broken something......The older me now stops at this stage and looks for advise 😉
As ever any help appreciated