Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: EBY from derby

  1. #11
    Subscribed Member PhilW's Avatar
    Join Date
    Aug 2014
    Location
    Merseyside
    Posts
    594
    Hi there,
    Hopefully the measurements that I took before I started ripping my car to pieces will help you. The measurements below were taken from the NS sill, but you can just reverse for the OS. The measurements were taken from an original unmodified sill.

    The image below shows where I took the measuremets from.
    [/URL]

    The following are the actual measurements
    [/URL]

    These should be useful to you as they show the increments of the rear sill flare

  2. #12
    Forum User Wshaw85's Avatar
    Join Date
    Jan 2016
    Location
    Allestree derby
    Posts
    14
    That's a really big help as there has been a bit of a bodge and needed to get the right flare did you use the
    standard sills and work on them I'm also after this measurement from the shock bolt to the detail line at the top of the sill cheers
    Attached Images Attached Images

  3. #13
    Subscribed Member PhilW's Avatar
    Join Date
    Aug 2014
    Location
    Merseyside
    Posts
    594
    I'll have a look tonight for you and report back.
    I used a brand new Genuine Williams OS rear 1/4 (very lucky to get hold of)
    I Repaired the NS sill which needed a minimal repair so was able to keep the flair detail no problem.

  4. #14
    Forum User Wobba's Avatar
    Join Date
    Sep 2006
    Location
    High Comp. ITB Willy
    Posts
    9,149
    Hello All 3's rust, more than others I hear. Nothing that cannot be sorted though, and they are a very rare breed of Williams

    Although the site has gotten quieter over the years, there is a vast array of info here still specifically for the Williams.

    My car is so non-standard now that I use many forums to get info, personally. But here is where you need to start

  5. #15
    Forum User Wobba's Avatar
    Join Date
    Sep 2006
    Location
    High Comp. ITB Willy
    Posts
    9,149
    As for the issue and info you need, I would look at getting hold of a rear quarter from a scrapper 16v as OEM ones are now completely sold out. I think I had the last one from France. You can use the standard sills and modify them to fit, the part is cheap.

    A good bodyshop with experience can so them properly.

  6. #16
    Forum User Wshaw85's Avatar
    Join Date
    Jan 2016
    Location
    Allestree derby
    Posts
    14
    Cheers for that guys will try and get the pics up 2moro I've just got my
    welder back from being fixed did anybody know the length of the Williams sill compared to to poverty spec
    cheers
    Last edited by Wshaw85; 23-01-2016 at 19:33.

  7. #17
    Forum User
    Join Date
    Jul 2007
    Location
    Ambergate, Derbyshir
    Posts
    441
    HI,

    The williams /16v sills are the same length. Just the rear part flairs out slightly I think

    Dunc

  8. #18
    Subscribed Member PhilW's Avatar
    Join Date
    Aug 2014
    Location
    Merseyside
    Posts
    594
    I have checked the measurement that you were after, although my car does not currently have rear shocks installed so I have measured from the bodywork just below the bolt to the outer point that you requested and its 27cm.

    The poverty spec pattern sills are longer than the Williams/16v ones so they will need to be shortened and as previously detailed the Williams ones are deeper and flare out at the back, so need quite a bit of modification work to make them match - good luck with the project.

  9. #19
    Forum User Wshaw85's Avatar
    Join Date
    Jan 2016
    Location
    Allestree derby
    Posts
    14
    Anybody know the guy in Hinckley matt brown I'm seeing if he breaks clios still
    Last edited by Wshaw85; 25-01-2016 at 20:26.

  10. #20
    Forum User
    Join Date
    Jul 2007
    Location
    Ambergate, Derbyshir
    Posts
    441
    lol, Mat Brown, yeah he is still very alive and kicking and breaking clios like a mo fo!

    Dunc


 

Similar Threads

  1. anyone in derby area
    By Maka@shakenbakeracing in forum Performance/ECU Tuning
    Replies: 8
    Last Post: 01-02-2008, 09:27
  2. williams 2 derby
    By Allan in forum Was it you ?
    Replies: 0
    Last Post: 18-08-2007, 12:56
  3. The derby!!
    By DaveH in forum Off Topic
    Replies: 15
    Last Post: 11-12-2006, 20:24
  4. Newbie in Derby
    By malbon in forum Newbie Section
    Replies: 22
    Last Post: 30-01-2006, 18:27
  5. Naples valver derby
    By Allan in forum Was it you ?
    Replies: 4
    Last Post: 20-09-2005, 17:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •